What axles are in my 1998 Jeep TJ?
TJ Wranglers will have either a Dana 30 in the front and a Dana 35 in the rear unless you have a Rubicon model. In which case you’ll have 44s front and back.
What kind of axle does a Jeep Wrangler have?
TJ Wrangler:1997-2006 Rear 3.73 ratio Dana 44 optional on Sport and Sahara models, also standard on X model Rocky Mountain Edition. 2003-2006 Rubicons also come with 44’s front and rear, and the rear Dana 44 has been an option for TJ’s for quite some time.
What’s the gear ratio on a Wrangler Rubicon?
Rubicon models come standard with a 4.10 rear gear ratio and also use a Dana 44 axle in the front with either a 3.73 or 4.10 gear ratio. Rubicon models also come with an electronically lockable differential for optimal traction while in 4WD.
When to change the axle on a jeep?
However, many jeep owners still believe swapping a new, beefier axle is more cost effective and better. As a general rule of thumb, most owners agree that once a jeep has been modified to run 32″ or 33″ tires, it is time to start thinking about upgrading the rear dana 35.
Where is the 44 axle on a Jeep Wrangler?
Lastly, Dana’s 44 axle can be found under the front or rear end. And the differential cover on this one will not change from front to rear; consisting of flat sides and an angular top and bottom.
What kind of axles does a Jeep Wrangler have?
Most Sport and Sahara models come with an upgraded design Dana 35 in the rear and the same JK Dana 30 in the front. Rubicon’s are equipped with a new design Dana 44 in the front and rear. Revolution Gear & Axle offers Ring and Pinion Gear Sets in several different ratios for the following axle models, across all years of the Jeep Wrangler.
Rubicon models come standard with a 4.10 rear gear ratio and also use a Dana 44 axle in the front with either a 3.73 or 4.10 gear ratio. Rubicon models also come with an electronically lockable differential for optimal traction while in 4WD.
What kind of differential does a jeep TJ have?
Jeep introduced the inaugural Rubicon trim level on the 2003 TJ, geared toward off-roaders. Rubicon’s came standard with locking front and rear differentials. TJs come with a Dana 30 or a Dana 44 in the front and either a Dana 35 or a Dana 44 in the rear. Typically the Sport and Sahara models include the Dana 30-Front/Dana 35-Rear.
How are axle lengths measured on a wrangler?
Measuring front the center to the end of the shaft will get you the inner and outer axle lengths. C-clip axle shafts and semi-float axle shafts are measured slightly differently than the full-float shafts. C-clip and semi-floats are measured from the end of the splines to the front of the mounting flange.