How big of a tire do I need for a Jeep Wrangler?
The biggest diameter tire you can fit on a Jeep Wrangler with a stock suspension is 33 inches. The common 33-inch tire sizes are any of the following: 275/70/18. Determining the largest tire size for your Jeep Wrangler is also governed by what you intend on doing with your Jeep.
How big can my Jeep tires be without a lift kit?
Another important thing to take into consideration is the width of the tire. On a 33″ tire, that can range from slightly less than 10 inches to over 11 inches as a general rule. You might be able to get by with the 33″ tire in terms of height, but the width will probably cause rubbing from inner fenders, suspension parts, or end links.
What kind of lift does a Jeep Wrangler use?
A body lift is just what the name implies – you are raising the body of the Wrangler in order to create more room in the wheel wells to add larger tires, which essentially lifts the Jeep. This is done through the use of polyurethane or rubber spacers and is one of the most cost effective ways to gain that aggressive look.
Can a taller tire fit on a Jeep JK?
Remember going to a taller diameter tire will lift your wrangler JK a little higher up than stock, so it is possible you can rollover a little easier. If you go little higher, it is a good idea to go a little wider as well, this will help the jeep from rolling over and give it more stability.
The biggest diameter tire you can fit on a Jeep Wrangler with a stock suspension is 33 inches. The common 33-inch tire sizes are any of the following: 275/70/18. Determining the largest tire size for your Jeep Wrangler is also governed by what you intend on doing with your Jeep.
Another important thing to take into consideration is the width of the tire. On a 33″ tire, that can range from slightly less than 10 inches to over 11 inches as a general rule. You might be able to get by with the 33″ tire in terms of height, but the width will probably cause rubbing from inner fenders, suspension parts, or end links.
A body lift is just what the name implies – you are raising the body of the Wrangler in order to create more room in the wheel wells to add larger tires, which essentially lifts the Jeep. This is done through the use of polyurethane or rubber spacers and is one of the most cost effective ways to gain that aggressive look.
What’s the biggest tire without lift for JL?
For example – I ran Duratrac 285/70R17s on AEV Pintlers on my 2014 JKU Sahara with no lift. Minor trimming of the air dam was required. As I understand it, we get a bit more space in the JL, correct?
Why do I need to change the tires on my Jeep Wrangler?
Changing the tire size can increase ground clearance, improve traction, impact fuel efficiency and overall vehicle health. Great for occasional off-roaders, those who drive primarily around town. Most Jeeps will need a leveling, lift kit or some type of modification to accommodate tires of this size.
What do the numbers mean on Jeep Wrangler tires?
The other option is “B” for Bias Ply used on some truck types. The last two digits in the system (17) represent the tire’s wheel diameter in inches. Additionally, if tires are being referred to in inches, the measurement will read 33×12.50R15.
How big is the rear axle on a Jeep Wrangler?
The YJ Dana 30 hold a reverse cut ring and pinion, but the TJs do not. Both TJs and YJs, however, use a 5×4.5 inch bolt pattern. Dana 35: This was an axle size used on most Jeep rear axles. They had a ring gear diameter of 7 and 9/16 inches. They came with either a 3.21 or 4.10 gear ratio.
How big are the tires on a Jeep Wrangler?
The tire size for your Jeep Wrangler depends upon the year of manufacturer. Select the year of your Wrangler to narrow down the results. You may also view a complete tire size chart for your Jeep Wrangler below.
Changing the tire size can increase ground clearance, improve traction, impact fuel efficiency and overall vehicle health. Great for occasional off-roaders, those who drive primarily around town. Most Jeeps will need a leveling, lift kit or some type of modification to accommodate tires of this size.
The other option is “B” for Bias Ply used on some truck types. The last two digits in the system (17) represent the tire’s wheel diameter in inches. Additionally, if tires are being referred to in inches, the measurement will read 33×12.50R15.