How do you take the doors off of an old Jeep Wrangler?

How do you take the doors off of an old Jeep Wrangler?

How to Take the Doors off Your Jeep Wrangler

1. Disconnect any power cables. Remove the footwell under your dash or by the B-pillar to do so. They should pop off by removing the clips.
2. Gently lift the door straps off at the hooks to remove them.
3. Remove the door hinge bolts and gently slide the door off and away.

What is the easiest way to take doors off a Jeep?

How To Remove the Doors on a Jeep

1. Disconnect any wiring and cables by removing the footwell under your dashboard or by the b-pillar.
2. Gently lift the door straps off their hooks.
3. Remove the door hinge bolt and gently slide the door away from the body.
4. Store doors in a cool, dry place for safekeeping.

Do hard tops come off Jeep Wranglers?

• Jeep Wrangler hardtop does come off, and above in this article are steps you can take to get your hardtop off. As stated in the process, you should get someone to help you with the removal of your jeep hardtop. Trying to do it alone can be dangerous as the hardtop wrangler can be quite heavy.

How do you remove a front door on a Jeep Wrangler?

The hinge tells you: T50. Right here. The process is basically the same for the front and rear: Roll down the windows, remove the door check arm, unplug the wiring, drop the two hinge bolts, pull off the limit strap, and lift it free. It’s a simple process—but not entirely idiot-proof, as I discovered.

How do you remove power windows from a Jeep Wrangler?

If your Jeep is equipped with power windows, locks or mirrors, there will be a wire harness that will need to be unplugged. Before unplugging the wire harness, lower the windows to ensure that the glass is properly protected within the door frame and to make removal easier.

How do you remove wiring from a Jeep Cherokee?

Press the release on the plastic wire pigtail and pull it backward to disconnect the wiring. If your Jeep does not have power windows or door locks, you can skip this step. Be careful not to break the plastic clip that holds the wiring pigtail in place. Locate the two bolts holding the door on the vehicle.

Is the top of a Jeep Wrangler removable?

Jeep Wranglers are designed with removable body components, like the top and doors. In this tech guide we’ll discuss the procedures involved with removing the doors, storage solutions and tube door options available.

The hinge tells you: T50. Right here. The process is basically the same for the front and rear: Roll down the windows, remove the door check arm, unplug the wiring, drop the two hinge bolts, pull off the limit strap, and lift it free. It’s a simple process—but not entirely idiot-proof, as I discovered.

If your Jeep is equipped with power windows, locks or mirrors, there will be a wire harness that will need to be unplugged. Before unplugging the wire harness, lower the windows to ensure that the glass is properly protected within the door frame and to make removal easier.

Press the release on the plastic wire pigtail and pull it backward to disconnect the wiring. If your Jeep does not have power windows or door locks, you can skip this step. Be careful not to break the plastic clip that holds the wiring pigtail in place. Locate the two bolts holding the door on the vehicle.

Jeep Wranglers are designed with removable body components, like the top and doors. In this tech guide we’ll discuss the procedures involved with removing the doors, storage solutions and tube door options available.