How many quarts of transmission fluid does a 2009 Jeep Wrangler take?
Wrangler fluid capacities are not a one-size-fits all proposition….
| Description | Type | Capacities |
|---|---|---|
| NSG370 Manual | Mopar Manual Transmission Lubricant or equivalent | 1.6 Quarts / 1.5 Liters |
| NV241 Transfer Case | ATF+4 | 2.1 Quarts / 2.0 Liters |
What type of transmission fluid does a 2009 Jeep Wrangler take?
Valvoline Synthetic Transmission Fluid ATF+4 1 Quart.
How much fluid does a Jeep Wrangler need?
Lower the vehicle and add the specified amount of automatic transmission fluid through the filler/dipstick tube. Expect to need about 4 quarts, but do not overfill. With the transmission in Park and the parking brake set, run the engine at a fast idle for a minute, but don’t race it.
How often does a Jeep Wrangler transmission leak?
If your Wrangler’s transmission is leaking a quart of ATF or so every thousand miles, that’s going to be manageable. But, if you’re losing a quart every time you take a drive, that’s going to be a real problem, especially if you let the fluid level get too low.
What happens when transmission fluid is low in a Jeep Wrangler?
Over time, your Jeep Wrangler ‘s Transmission fluid can get low. By the time you are experiencing the symptoms of low transmission fluid, damage is already being done. Your Wrangler’s transmission fluid is responsible for powering, lubricating, and cooling the transmission. That’s a lot for one fluid to handle.
What kind of engine oil does a Jeep Wrangler use?
Sizes of Wiper Blades Battery Fluids Engine Oil Transmission Fluid Antifreeze & Coolant Wheels Tire and Rim Sizes Bolt Patterns Filters Air Filter Cabin Filter Fuel Filter Oil Filter Brakes Brake Discs Brake Drums Brake Pads Brake Fluid Fans
Lower the vehicle and add the specified amount of automatic transmission fluid through the filler/dipstick tube. Expect to need about 4 quarts, but do not overfill. With the transmission in Park and the parking brake set, run the engine at a fast idle for a minute, but don’t race it.
When to change transmission fluid in Jeep Wrangler?
At the specified time intervals, Haynes reccomends 30,000 miles or 2 years, the transmission fluid should be drained and replaced. Since the fluid will remain hot for hours after driving, perform this procedure only after the engine has cooled down completely.
Is the Wrangler JK fluid capacities one size fits all?
Wrangler fluid capacities are not a one-size-fits all proposition. In order to keep your JK in running condition, you have to make sure that the fluid levels are kept within optimal range, and if necessary, to replace missing fluid with the correct type. Wrangler fluid capacities are not a one-size-fits all proposition.
What kind of oil does a Jeep Wrangler use?
Capacities in the JK Wrangler can vary depending on the year, make and model of your Jeep. The chart below will help you determine what type of oil to use for your JK, which transmission fluid you should use if your JK is a manual transmission, and what the limits are for your engine’s oil.