How big is the gas tank on a 2004 Jeep Wrangler?
19.0 gallons
Compare Side-by-Side
| 2004 Jeep Wrangler/TJ 4WD | |
|---|---|
| Annual Fuel Cost* | $2,950 |
| Cost to Drive 25 Miles | $4.95 |
| Cost to Fill the Tank | $60 |
| Tank Size | 19.0 gallons |
What does the torque converter do on a Jeep Wrangler?
Your Jeep Wrangler’s torque converter is responsible for converting the energy generated by the engine at the flywheel and transferring it to the transmission, creating a bridge between the engine and the transmission.
Why does a Jeep Wrangler have a 4 cylinder engine?
The only reason it sits above the 4 Cylinder Inline engine is that it that the 4 cylinder has so little power it is hard to recommend to anyone who wants to use the 4 Cylinder Jeep without major modifications to gearing. Most notably are problems that have come up with oil consumption under 100k miles.
How much torque does a Jeep Wrangler Rubicon have?
However, with its peak 295 combined pound-feet of torque, it bests the V6 by 35 lb-ft. The turbo engine and electric motor work well together, for responsive and smooth around-town performance.
What’s the horsepower of a Jeep 4.0 engine?
In 1988 the 4.0 received higher flowing fuel injectors, taking output to 177 hp (132 kW) and 224 lb-ft (304 N·m) respectively. In 1991 Chrysler Corporation, then the owners of the Jeep brand, redesigned the RENIX engine control computer and raised the intake ports approximately 1/8″ for a better entry radius.
When did the torque specs come out for the Wrangler?
The torque specs needed to rebuild this inline six if the need should arise. This engine was used from 2003 to 2006 and served as the successor to the 2.5 liter engine. The oxygen sensors require a special socket to be removed due to the wires. Also be sure to note that there are different specs for each set of bolts.
How many horsepower does a 4.0 liter Jeep engine have?
The engine has a displacement of 241.6 cubic inches but it kept the same-sized connecting rod length. The 4.0-liter, 6-cylinder engine provides 190 horsepower and Jeep built the engines to be able to travel at least 300,000 miles without a rebuild. The 4.0-liter engine was the last of Jeep’s inline engines.
The only reason it sits above the 4 Cylinder Inline engine is that it that the 4 cylinder has so little power it is hard to recommend to anyone who wants to use the 4 Cylinder Jeep without major modifications to gearing. Most notably are problems that have come up with oil consumption under 100k miles.
What kind of transmission does a Jeep Wrangler use?
The diesel engine gets its own heavier-duty transmission, a ZF 8HP75 eight-speed automatic—the only available gearbox. That transmission has the same gear ratios as the one used with gasoline engines, and it is in the same family of ZF transmissions as the 850RE in other Wranglers.