Is there a code 33 on a Jeep Wrangler?
Code 33 will always be present for jeeps without air conditioning. Neither of these codes will themselves cause a check engine light to be displayed. Great info. Thanks. Glad my ’88 doesn’t have a computer.
Why do I get a check engine code on my Jeep?
27*: One of the Injectors output drivers does not respond properly to control signal. 33*: Air conditioning clutch relay circuit open or shorted. If your Jeep doesn’t have AC you will always get this code. Will not trigger a “Check engine light”. 34*: Speed control vacuum or vent solenoid circuits open or shorted.
What does code 12 mean on a Jeep Wrangler?
Quick Note: Code 12 is a very common code, and indicates the battery has been disconnected within the last 50 startups. Code 33 will always be present for jeeps without air conditioning. Neither of these codes will themselves cause a check engine light to be displayed. Great info.
Are there engine codes for the Jeep Wrangler YJ?
Jeep check engine codes for the Jeep Wrangler YJ and the XJ Cherokee. These codes and video may work with other OBD1 Jeeps. When Chrysler / Jeep came up with this idea for getting the engine codes, it was a very smart move. This generation of Wranglers and Cherokees had the most simple diagnostics of any other.
How does the trouble code work on a Jeep Wrangler?
The on-board reporting will communicate trouble codes to you through the check engine light in a series of flashes; similar to Morse Code. The key trick: With the ignition OFF, turn the key to ON (do not start the jeep), OFF, ON, OFF, ON (Complete this sequence in under 5 seconds).
Code 33 will always be present for jeeps without air conditioning. Neither of these codes will themselves cause a check engine light to be displayed. Great info. Thanks. Glad my ’88 doesn’t have a computer.
What was the diagnostic code for a 1995 Jeep Cherokee?
An open or shorted condition derected in the EGR solenoid circuit Possible air/fuel ratio imbalance not detected during diagnosis. http://www.jeepforum.com/forum/f13/obd-trouble-code-32-1995-orvis-636815/ Code 33. Air conditioning clutch relay circuit. An open or shorted condition detected in the air conditioning clutch relay circuit. Code 34.
What’s the code for the obdi YJ trouble code?
The key trick: With the ignition OFF, turn the key to ON (do not start the jeep), OFF, ON, OFF, ON (Complete this sequence in under 5 seconds). Be sure to leave the key in the on position until the END OF CODES sequence has flashed (55)
What is the engine code for a Jeep YJ?
Jeep check engine codes for the YJ, XJ and other OBD1 jeeps. Jeep check engine codes for the Jeep Wrangler YJ and the XJ Cherokee. These codes and video may work with other OBD1 Jeeps. When Chrysler / Jeep came up with this idea for getting the engine codes, it was a very smart move.
What does code 55 mean on an OBD1 Jeep?
Code 55 signals the end of stored OBD codes. You can repeat the key sequence as many times as needed if you were unsure of a code. *= Check Engine light will not illuminate at all times if this Trouble Code it present. **= Check Engine light will illuminate during engine operation if this Trouble Code is present.