Why is my fuel pump not working in my Boxster?

Why is my fuel pump not working in my Boxster?

The pump could seize up at some time, or the pressure to the fuel injection system could drop. Either way, the car will not be performing at its peak. Another symptom of failure is the pump getting stuck, and then finally kicking in after turning the ignition on and off a couple of times.

How do you empty gas out of a Porsche Boxster?

If the car starts and runs for any length of time then the pump is working fine. This photo shows a safe method for emptying the gas out of the tank in your Boxster. Disconnect the pressure side hose from the top of the pump and connect some clear plastic tubing to the barb (yellow arrow).

Where is the fuel pump located on a Porsche Boxster?

The first step is to remove the battery from the car (see Pelican Technical Article: Battery Disconnect Switch / Battery Buddy Installation ). The lower battery tray acts as both a retaining platform for the battery and a cover for the fuel pump area. Underneath this tray, you will see the top of the fuel tank sending unit.

Are there any problems with the 986 Boxster?

The upgraded aos features a doubling in size of capacity for scavenging and is less prone to sucking up oil during high speed cornering. M96 engines fitted to the 986 and 987 Boxster can have issues with a bearing at one end of the engine intermediate shaft. The shaft connects the two ends of the engine timing gear.

The pump could seize up at some time, or the pressure to the fuel injection system could drop. Either way, the car will not be performing at its peak. Another symptom of failure is the pump getting stuck, and then finally kicking in after turning the ignition on and off a couple of times.

If the car starts and runs for any length of time then the pump is working fine. This photo shows a safe method for emptying the gas out of the tank in your Boxster. Disconnect the pressure side hose from the top of the pump and connect some clear plastic tubing to the barb (yellow arrow).

The first step is to remove the battery from the car (see Pelican Technical Article: Battery Disconnect Switch / Battery Buddy Installation ). The lower battery tray acts as both a retaining platform for the battery and a cover for the fuel pump area. Underneath this tray, you will see the top of the fuel tank sending unit.

When to replace air flow sensor in Porsche Boxster?

If the old sensor that you removed is 996.606.124.00, then you need to replace it with the same part number (or have Porsche update your DME software to accommodate the newer style sensor: see Technical Service Bulletin 1/00 2445 Air Flow Sensor — dated 4-18-00).