Why does the clutch not engage the AC compressor?
The clutch does not engage the ac compressor when the switch is turned to ac (reg and max) in the cab. The compressor turns easy by … read more
What to do if there is no power to an A / C compressor?
Re: No power to a/c compressor, I have checked the fuses,… The trigger from the dash switch activates the relay which in turn switches on the solenoid pulley to engage the compressor to work. If this circuit is traced the fault of a open circuit can be found out. If there is no power in the fuse or relay then the main wiring must be checked.
What’s the proper voltage for an AC clutch?
You just need to take a pair of alligator clips or something metal and jump those terminals together to get the compressor to run. Please check with a mechanic before following my advice though. get a service manual!!! I’m pretty sure that all automotive AC clutches use normal system voltage (12.7V minimum). yup, thinking that too.
Why is the clutch not kicking on on my Chevy Trailblazer?
Bypassed the low pressure switch with no change. With AC turned on, the clutch on the compressor does not kick on. The fuses all looked good for everything ac related. What should be my next diagnostic steps, jump relay, check power at the compressor plug?
What should I do if my compressor clutch is not working?
If you’re not getting battery voltage, pull the compressor clutch relay and check for power and ground on the relay control coil terminals in the socket. Wiring varies by make, model, and year. Some car makers trigger the relay control coil ground through the PCM or ECM.
How does an AC compressor clutch receive power?
AC compressor clutches receive power in a number of ways. They can activate through a relay that’s energized directly by a proper condition of the low and high pressure switches. Or, the relay can be operated by the PCM which has interpreted the condition of the low and high pressure sensors.
Re: No power to a/c compressor, I have checked the fuses,… The trigger from the dash switch activates the relay which in turn switches on the solenoid pulley to engage the compressor to work. If this circuit is traced the fault of a open circuit can be found out. If there is no power in the fuse or relay then the main wiring must be checked.
Why is my air conditioner clutch not getting power?
Air Conditioning Compressor Clutch Not Getting Power (electrical Ok. Here it goes! No power to AC Compressor Clutch. Here are the details: After researching this I’m thinking it could be the relay in the CCRM (constant control module)? Although I can’t find a good enough diagram to find it!