Why does my C5500 Gasser have a brake warning light?
It’s Christmas Day, we are 1,200 miles from home and our C5500 gasser has a brake warning light/alarm problem. It first happened a couple of days ago. The manual says that the brake warning lights and alarm may come on when braking and turning at the same time, which we were.
What does it mean when your abs light comes on?
Most commonly, this light is triggered by low brake fluid or an engaged parking brake. However on some vehicles, it can simply indicate a problem elsewhere in the system and can be illuminated immediately if there is an ABS fault.
Is there a brake warning light on a Kodiak C5500?
Topic: Brake Warning Light/Chime in Kodiak C5500 Posted By: lms20fan on 01/31/10 03:47pm Has anyone taken their coach to Chevy to get the Brake Warning light/annoying chime fixed and Chevy told you it needed a hydro booster pump motor for $500?
When do brake warning lights and alarm come on?
The manual says that the brake warning lights and alarm may come on when braking and turning at the same time, which we were. It doesn’t say anything about what mechanical conditions cause it or under what conditions it will reset. It stayed on until I got the MH stopped.
Topic: Brake Warning Light/Chime in Kodiak C5500 Posted By: lms20fan on 01/31/10 03:47pm Has anyone taken their coach to Chevy to get the Brake Warning light/annoying chime fixed and Chevy told you it needed a hydro booster pump motor for $500?
Why is my abs light not working on my Chevy?
The fault is usually due to broken solder joints on the circuit board. At this time I did not need to pull the EBCM and repair the solder. Loading…
What should I do about the brake warning light?
Has anyone taken their coach to Chevy to get the Brake Warning light/annoying chime fixed and Chevy told you it needed a hydro booster pump motor for $500? I read on here that it could be a brake light switch…no mention of that from chevy. I have a 2005 Endura. The brake warning light and chimes go off intermittently. Thanks!
Why is my brake light not working on my Chevy?
You may have code C0265 “Electronic Brake Control Module Motor Relay Circuit.”. The fault is usually due to broken solder joints on the circuit board. At this time I did not need to pull the EBCM and repair the solder.
How does the brake monitor work on a Kodiak C5500?
The electric brake monitor looks at various inputs, fluid flow in the booster circut, continuity through the aux boost motor, and brake fluid level. In the case of a faulty switch the EBCM will see the open cruise circut indicating the brakes are applied but no brake light switch input.
Why is the parking brake light on when released?
WHY IS PARKING BRAKE LIGHT ON. HANDBRAKE LIGHT ON WHEN RELEASED – YouTube WHY IS PARKING BRAKE LIGHT ON. HANDBRAKE LIGHT ON WHEN RELEASED
How does the brake light work on a Kodiak?
It is a double contact switch, a normally open set of contacts for the brake lights and a normally closed set for the cruise control. So when your foot is off the brake pedal there is power through the cruise control contacts but not the brake light circut, when you apply the brakes the cruise circut opens and the brake light circut closes.
It’s Christmas Day, we are 1,200 miles from home and our C5500 gasser has a brake warning light/alarm problem. It first happened a couple of days ago. The manual says that the brake warning lights and alarm may come on when braking and turning at the same time, which we were.
How does the parking brake warning light work?
It’s activated using a pedal, hand lever or electronic switch, and it keeps your car’s wheels from turning when parked. A switch in the parking brake system turns on the warning light whenever the parking brake is activated and the ignition is on.
The electric brake monitor looks at various inputs, fluid flow in the booster circut, continuity through the aux boost motor, and brake fluid level. In the case of a faulty switch the EBCM will see the open cruise circut indicating the brakes are applied but no brake light switch input.
It is a double contact switch, a normally open set of contacts for the brake lights and a normally closed set for the cruise control. So when your foot is off the brake pedal there is power through the cruise control contacts but not the brake light circut, when you apply the brakes the cruise circut opens and the brake light circut closes.
Why is there a brake warning light on my Chevy Silverado?
The brake warning light indicates that your Silverado has detected that one of its major brake components has failed, typically detected through a loss of pressure. You’ll feel a loss of pressure that manifests itself in the form of a “mushy” brake pedal.
What’s the brake warning light on my Endura?
Posted By: lms20fan on 01/31/10 03:47pm Has anyone taken their coach to Chevy to get the Brake Warning light/annoying chime fixed and Chevy told you it needed a hydro booster pump motor for $500? I read on here that it could be a brake light switch…no mention of that from chevy. I have a 2005 Endura.
Why is my brake chime not working on my Kodiak?
I found my Chime problem was the connector under Hydro Boost was not making good connection. Cleaned connector and Chime went away. If it is the Brake Switch and it is hooked to a brake controller. You need to read this bulletin. Bulletin #66.
Why did my Kodiak 5500 blow the fuse?
I have a 2008 4winds Kodiak 5500 that did it the day i picked it up from the dealer when it was new . The contacts burnt up in the brake switch and blew the fuse. Apparently the contacts were not rated high enough to handle the amperage of the circuit.
Why does my GMC ABS light keep coming on?
If the ABS dash light comes on and stays lit, and none of the ABS wires are damaged, it is likely that there is a partial failure in the ABS sensor. For specific information about GMC ABS braking systems, consult the particular vehicle’s manual (see Resources).
What to do if your GMC ABS is not working?
Turn the ignition to the “II” position and check the ABS dash light. If the ABS dash light comes on and stays lit, and none of the ABS wires are damaged, it is likely that there is a partial failure in the ABS sensor. For specific information about GMC ABS braking systems, consult the particular vehicle’s manual (see Resources).