Why does my Blend door heater blow warm air?
If the air gets hotter as the engine warms up, you know that it is a blend door issue. If it blows warm from the time you turn the engine on, that would indicate that the A/C system is malfunctioning. The logic behind this is that it takes the heater a minute or two to warm up.
Why is my Blend door actuator not working?
The logic behind this is that it takes the heater a minute or two to warm up. If you have it set all the way to cold, there should be no change in temp as the engine warms. If it does change, the blend door is still letting heat through. This would narrow it down to a bad actuator or a stuck blend door.
How does a blend door work in an AC unit?
The blend door controls air flowing through AC evaporator and diverts it into the vent system or through the heater coil, or any combination in between. The doors are controlled by a stepper motor.
How can I tell if my blend door is bad?
In the case of the Air Conditioner, if the coolant is low, you can usually tell. Turn the air conditioner on full blast with the engine cold. If the air gets hotter as the engine warms up, you know that it is a blend door issue. If it blows warm from the time you turn the engine on, that would indicate that the A/C system is malfunctioning.
Can a heater be removed from a blend door?
If the door is stuck the heater plenum with need to be removed and the problem resolved before installing the new unit. To test the blend door operation and too double check that you are changing the correct actuator motor turn the blower motor on and work the door in each way. You will be able to feel the air change temperature or vent level.
What to do if your blend door blower is stuck?
If the door is stuck the heater plenum with need to be removed and the problem resolved before installing the new unit. To test the blend door operation and too double check that you are changing the correct actuator motor turn the blower motor on and work the door in each way.
How can I tell if my blend door actuator is bad?
To test the blend door operation and too double check that you are changing the correct actuator motor turn the blower motor on and work the door in each way. You will be able to feel the air change temperature or vent level. Compare the bad actuator to the new unit.
How does an air blend door actuator work?
An air blend door actuator is constructed from a plastic housing, a small electric motor and a plastic gear set. A door position sensor is also incorporate into the unit to send feed back information to the climate control computer.