Why did my AUX cord stop working?
Check to see if the AUX cord is firmly connected to both devices. If this does not work and are only two rings, your cord is not compatible. If there are three rings, replace the auxiliary cord. If this does not work, the problem may be with the auxiliary cord jack and you may need to replace it.
How do I know if my AUX port is working?
Troubleshooting aux cable connections
- Check if the aux cable is good.
- Make sure you plugged the 3.5mm jack into the dedicated “aux” port.
- Observe if the cable is well fitted in the port where it is plugged into (slightly move the jack head to see if it is shaking)
Why is my aux not working on my Iphone?
Restart your iOS device and your car. Connect your iOS device to a different stereo USB port (if you have one). Try a different Lightning to USB cable. Update your iOS device.
Why are my headphones not working when I plug them in Iphone?
Check for debris, damage, or loose connections Check your headphone cable, connector, remote, and earbuds for damage, like wear or breakage. Look for debris on the meshes in each earbud. Firmly plug your headphones back in. If your iOS device has a case, remove the case to get a firm connection.
Why are some of my electrical plugs not working?
Some circuits are protected by a GFCI (Ground Fault Circuit Interrupter) and you may have noticed this outlet in the kitchen, bathroom, outdoors, or even in the garage. These have a test and reset button on them. Other devices or outlets that are tied in with these (GFCI’s) look similar to the other plugs in your home.
What causes a power outlet to stop working?
Once widened by a too-fat plug, the socket may no longer maintain contact with a different plug. If no power is reaching the receptacle, the problem lies elsewhere, such as in a loose or disconnected wire or worn insulation around the socket.
What should I do if my plug socket is not working?
Inspect the inside of the cover panel as well. Be careful not to snatch the wires out of the socket. Check the wiring order. The order of the wires should comply with the terminal labelling on the back of the socket – brown for Live (L), blue for Neutral (N), and green and yellow striped for Earth (E).
Why does my 12 volt charger not work?
CARS.COM — If you have a 12-volt power outlet that suddenly decided it didn’t want to work, the first thing to check is whether the phone charger or whatever 12-volt accessory you’re plugging into the outlet isn’t the problem.