Where to put the air conditioner compressor on a JAG?
Several people, including Victor Naumann and Harry Trafford, have pointed out that a block of wood positioned between the V and the top of the radiator can be very helpful to hold the compressor forward and above its normal position while you’re working.
When to replace Ignition System on Jaguar XJS?
If you have a pre-1989 XJS you may want to consider Jaguar parts to replace the original ignition system as it had a distributor problem which seized up the catalytic converter and caused fires. Head gaskets and fuel injection hoses should also be replaced when worn out for the same reason.
Where is the compressor protection circuit on a 1983 XJ-S?
COMPRESSOR PROTECTION CIRCUIT — A-6: Just below the inlet and outlet connections on the A-6 compressor is a sensor held in place with a C-clip, with a wire connected to it. On the 1983 XJ-S, this is a thermally-operated switch that shorts to ground in the event that there is trouble with the freon system.
Do you need Jaguar XJS parts for a coupe?
Depending on your version you may need Jaguar XJS parts for a coupe, a convertible, a V-12 or straight 6 engine. If you have a V-12 the cooling systems needs to be maintained often as it may result in overheating because of the small engine bay in which case it can result in a blown head gasket.
Several people, including Victor Naumann and Harry Trafford, have pointed out that a block of wood positioned between the V and the top of the radiator can be very helpful to hold the compressor forward and above its normal position while you’re working.
COMPRESSOR PROTECTION CIRCUIT — A-6: Just below the inlet and outlet connections on the A-6 compressor is a sensor held in place with a C-clip, with a wire connected to it. On the 1983 XJ-S, this is a thermally-operated switch that shorts to ground in the event that there is trouble with the freon system.
What kind of air conditioner does a Jaguar XJ use?
One possibility, and the first to be “approved”, is to modify the system to use R-134a refrigerant. Jaguar offers a retrofit kit; the part number is JLM 11610 for the 1993-94 XJ-S with a Sanden 709 compressor, and JLM 11611 for the 1979-92 cars with the Harrison compressor.
What is the C clip on a 1983 Jaguar XJ?
Just below the inlet and outlet connections on the compressor is a sensor held in place with a C-clip, with a wire connected to it. On the 1983 XJ-S, this is a thermally-operated switch that shorts to ground in the event that there is trouble with the freon system.
What kind of compressor does a Jaguar air conditioner use?
AIR CONDITIONER COMPRESSOR: Up through 1992, the Jaguar A/C compressor was labelled “Harrison” but was in fact the standard GM item referred to as an A-6 — and therefore comparatively cheap to replace. In fact, it is generally recommended to simply replace the compressor rather than attempt even the simplest repairs.
What should I replace in my Jaguar XJS?
Frequently, these repairs are replacements with the AC compressor, Air filter, Brake components. Crankshaft balancer and door actuator among many others being the most frequently made replacements in auto shops. By many criteria, the XJS series models are considered collectibles, young classics if you will.
How does the Jaguar air con system work?
There is a thermostat inserted into the evaporator matrix which switches off the refrigeration compressor when the matrix approaches freezing point. This is to prevent icing up which would stop air flowing through it. On early systems this can be unreliable.