Where is the coolant in a Pontiac G6 leaking?
Please discard Corporate Bulletin Number 07-06-02-006 (Section 06 — Engine). Some customers may comment on coolant leaking from the engine. The gasket located between the coolant crossover pipe and the front of the right (rear side) cylinder head may be leaking.
Why is my Pontiac G6 engine not starting?
There are a lot of issues that can cause your G6 to crank, but not start. The engine needs air, fuel, and a spark in order to run. It is highly likely that if the engine is cranking, but not starting that it has thrown an OBDII code. It is definitely worth it to use an OBDII scanner to check and see if the engine has thrown any trouble codes.
Where is the C2 connector on a Pontiac G6?
Locate the C2 connector on the BCM. Unlatch the C2 connector and disconnect the C2 connector from the BCM.
Please discard Corporate Bulletin Number 07-06-02-006 (Section 06 — Engine). Some customers may comment on coolant leaking from the engine. The gasket located between the coolant crossover pipe and the front of the right (rear side) cylinder head may be leaking.
Where can I get a 2007 Pontiac G6 owner manual?
Canadian Owners A French language copy of this manual can be obtained from your dealer or from: Helm, Incorporated P.O. Box 07130 Detroit, MI 48207 Litho in U.S.A. Part No. 15864101 A First Printing©2006 General Motors Corporation. All Rights Reserved. 3 How to Use This Manual
Who is the owner of the Pontiac G6?
GENERAL MOTORS, GM, the GM Emblem, PONTIAC, the PONTIAC Emblem, and the name G6 are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice.
Where is the heat button on a Pontiac G6?
The buttons are located on the outboard side of the driver’s and front passenger’s seats. Press the top of the switch to turn the feature on. The seat will heat to the high setting. The indicator light above the switch will be lit next to the number 2. Press the top of the switch again to go to the low heat setting.
Where is the 3.5 coolant coolant tube leaking?
2006 G6 GT with 3.5L V6 (auto, a/c). Thanks! Where I found evidence of the crossover gasket leaking was I had fluid leaking from the point where the block and the rear head meet on the right side of the engine. You will have to be able to get under the car and it is still hard to see it.
2006 G6 GT with 3.5L V6 (auto, a/c). Thanks! Where I found evidence of the crossover gasket leaking was I had fluid leaking from the point where the block and the rear head meet on the right side of the engine. You will have to be able to get under the car and it is still hard to see it.
Why is coolant coming out of the exhaust?
Try SiriusXM free – 3 months for $1. Fees and taxes apply. See offer details. If coolant is coming out of your exhaust it means you have a crack or bad gasket seal between the cooling system and the intake/exhaust manifold, or the cylinder head/cylinder wall.
How can I get antifreeze out of my exhaust?
Once you carefully remove your engine (not by just hacking at stuff) all it takes is to remove the cut-off wires and hoses from the new one, drop it in, and attach all your existing plugs and fittings. Bolting it to the drivetrain and the exhaust completes the install. You and some friends can probably accomplish this over a weekend.
How to stop an oil leak on a 2007 Pontiac G6?
1. Remove oil filter, let drain then plug filter housing with paper towel to stop leak. 2. There are four bolts which need removed. 3 for the filter and one for a plate covering the filter. 3. remove the two easiest bolts to access, then remove the bolt holding the plate. 4.
Are there any problems with the 2007 Pontiac G6?
CarComplaints.com Notes: Unfortunately the 2007 Pontiac G6 continues a serious trend of steering problems from the prior model year. No one has added a helpful site for this 2007 G6 problem yet.
1. Remove oil filter, let drain then plug filter housing with paper towel to stop leak. 2. There are four bolts which need removed. 3 for the filter and one for a plate covering the filter. 3. remove the two easiest bolts to access, then remove the bolt holding the plate. 4.
CarComplaints.com Notes: Unfortunately the 2007 Pontiac G6 continues a serious trend of steering problems from the prior model year. No one has added a helpful site for this 2007 G6 problem yet.