Where are the engine mounts on a Mercedes SLK 230?
There are two engine mounts: one on the right and left side of the engine. The mounts are specific to each side as they both have locating points that only fit the proper side. We will begin by replacing the left side engine mount. You will see the access hole for the lower mounting bolt on the cross member by the A-arm support.
Are there any common problems with Mercedes SLK?
i think its more related to the “type ” of slk he is looking at. for instance some common issues for slk may be. top issues ie: hydraulic cylinders leaking seals cracking hinges stiff. brakes and services performed. slk32 issues are intercooler pump, lower a arm bushings.
What causes an engine mount to crack on a Mercedes SLK?
Heat and oil can take its toll on the mount, causing the rubber portion to crack and separate. When this happens, the mount collapses and no longer supports the engine correctly.
How to change the fluid in a SLK?
Look in the w210 forum for 722.6 sticky, how to change the fluid – look at post by Yumling for optimal fluid change, quantity and type of fluid, etc. Type of fluid especially important! You also have to buy or make a dipstick. It does not stay in place, but is only used to measure the level.
Where is the fill hole on a Mercedes SLK 230?
If the fluid is low, the fill hole is on top of the hydraulic pump. The plug is easier to access by removing the metal cover, which is secured by four bolts having T30 Torx heads (arrows). The filler hole (arrow) is on top of the pump, on the right-rear fender side.
How many hydraulic cylinders are in a SLK 230?
Five hydraulic cylinders, nine limit switches, a control switch, four window motors, a pump, two solenoids, a relay, cables/pulleys, and a control module all have to work in sync for the top to operate properly. If one link in the chain breaks down, the top either won’t work or it stops mid-retraction.
How to troubleshoot a Mercedes Benz SLK top?
For the average SLK owner, top troubleshooting is possibly better left to the pros. The Vario Roof Diagnostic Aid manual is detailed and extensive. However, the average owner can separate the more-obvious problems from the complicated ones. It might save a trip to the dealership or shop.
Why is my hydraulic pump not working on my Mercedes SLK?
If the battery reads at least 11.4 volts with the engine off and its cables are clean and clamped snugly on its terminals, then focus on the top’s switch. If nothing happens when the switch is pulled and the switch doesn’t illuminate, then it or its connections could be bad.