When do I need to change my timing belt?

Most models, like those with 3.2-liter engines, do not need their timing belt replaced until they hit 92,000 miles or after six years, whichever comes first. Others can go as long as 105,000 miles before the belt has to be replaced. Most Audis have a recommended timing belt replacement at 110,000 miles.

When to replace timing belt on Acura 3.2 liter?

Acuras have one of the longest intervals for timing belt replacement. Most models, like those with 3.2-liter engines, do not need their timing belt replaced until they hit 92,000 miles or after six years, whichever comes first.

How do you lock down the timing belt?

Some manufacturers make a slot on the back side of the cam or a hole on the top of a cam bearing cap to slide in a punch, screwdriver or flat piece of steel through the back to lock down the cams after everything has been lined up at TDC No.1.

What happens if your timing belt skips or breaks?

In an interference engine, the valves and piston share the same airspace and the timing belt keeps them from touching. This is why you’ll have a major engine failure on your hands if the belt breaks or skips.

How often do you need to change timing belt?

Available for a few dollars at any auto parts store, you’ll likely need to change yours every 90,000 to 120,000 miles (140,000 to 190,000 km), depending on your engine. Gather the information about your vehicle. You will need to know the make, model, and year model of the vehicle, as well as the engine type and size.

When to replace timing belt on 1998 Metro?

But most belt manufacturers recommend replacing the timing belts on these engines at 60,000-mile intervals (see chart on page 21). The only exception is GM’s recommendation to replace the timing belt at 100,000 miles on the 1998 1.0L 3-cylinder Chevy Metro. Determining the true condition of a timing belt isn’t easy for two reasons.

What happens if your timing belt is broken?

The timing on the engine must be set exactly, or the valves and the pistons may collide, resulting in very expensive engine repairs. If your timing belt is broken, then make sure valve damage was not done before proceeding with the belt replacement.

What’s the timing belt on a GM 3.0L V6?

On GM’s 3.0L DOHC V6, for example, GM says to use a crankshaft holder tool (J42069-10) and camshaft holders (J42069-1 and J42069-2) or something equivalent to prevent movement while the timing belt is wrapped around the pulleys and tightened.

When to replace timing belt on Volkswagen Jetta?

For instance, Toyota recommends that the Camry replace their timing belts after 60,000 miles. If you have a Ford Focus you can expect to replace the timing belt between 60,000 miles and 90,000 miles. The manual for the Volkswagen Jetta says that you can keep your timing belt until 120,000 miles.

What happens to an engine when the timing belt fails?

Engines come in two configurations: Interference and non-interference. When a timing belt fails the camshaft (s) stops turning and the valves stop moving, but the crankshaft still rotates for a few seconds. An interference engine has insufficient clearance between the valves and pistons.

When is the best time to replace your timing belt?

But to be on the safe side, many mechanics recommend replacing it earlier, such as around 90,000 miles. Being conservative and opting for an early replacement can protect your car from expensive damage. In general, Chrysler vehicles should have their timing belt replaced at 50,000 miles or after five years, whichever comes first.

When to replace timing belt on Honda Accord?

Hondas can go as much as 105,000 miles before they need the timing belt replaced. However, some models have a shorter recommended interval. Some need to be replaced at 90,000 miles, so, again, check your owner’s or repair manual.

Your car does not use a timing belt. The M54 engine in your car has a timing chain, which should not need to be replaced until well over 200,000 miles. 19 people found this helpful. Does this apply for a 2005 bmw325ci..?

When do you change the timing chain on a BMW?

11 Answers. BMW uses timing chains most of / if not all their cars check all data for chain replacement intervals at you local dealer. 2 people found this helpful. Your car does not use a timing belt. The M54 engine in your car has a timing chain, which should not need to be replaced until well over 200,000 miles.

Can a broken timing belt be removed on an interference engine?

Don’t do this on interference engines unless you’re sure the belt is still intact. If you have not already bent your valves with a broken timing belt, you will likely do so if you spin the crankshaft without the camshaft spinning. Determine if the harmonic balancer pulley needs to be removed to remove the timing belt cover.

When to change timing belts on a Ducato?

So its up to the individual and change them , then enjoy your motorhome. What I find interesting is for exactly the same engines Peugeot seem to have a 70K miles or 10 years service interval. This makes sense actually because the ducato/boxer uses the latest technology timing belts which have a much longer life and are stronger.

How long does it take to change a timing belt?

As a service provider it is my duty to explain this concept to you the consumer. Many times it is a 4 or 5 hour job to change a timing belt, by not doing the job right and replacing all of the tensioners, idler pulleys and the water pump at the same time puts you, the consumer in harm’s way.

How often do you replace timing belt on Camry XLE?

An independent dealer where I purchased my 2005 Camry XLE 4-cylinder said I need to replace my timing belt every 60,000 miles. It has 180,000 miles on it. He quoted a price of $500. Trying to find a cheaper alternative, I went to a local mechanic, who told me it has a timing chain, not a belt, that I don’t need to replace.

Can you remove the tensioner on a timing belt?

Keep testing yourself! Loosen the mounting bolt (s) holding the belt tensioner using any special cam holding tools, while following the service manual. Do not remove the tensioner completely unless replacing it.

When to replace timing belt on Hyundai Sonata?

Most vehicle maintenance in general mentions whichever comes first. I’ll have to confirm in the user manual tomorrow, but seems the Hyundai recommendation (as offered by mechanic shop) says timing belt replacement at 48 months or 60k miles (37500 miles under severe conditions).

How often should you replace your car belt?

Gates also recommends a 60k mile interval replacement…even when the manufacturer says 100k miles replacement interval. Gates’ incentive is to sell as many belts as possible.

What mile interval should the timing belt be replaced?

A timing belt typically needs to be replaced between 40,000 and 100,000 miles depending on the vehicle. It’s a few hundred dollar repair. A timing chain doesn’t need to be replaced unless there is a problem with it.

What is the recommended mileage to change the timing belt on?

While the recommended timing for a belt change in most vehicles is between 60,000 miles and 100,000 miles your best bet is to check with your owner’s manual to know for sure exactly when yours has to be changed.

When to replace timing belt?

Every car manufacturer recommends replacing the timing belt after a given time, and it is imperative to take this advice. The time or distance between timing belt replacement depends on the specific make and model of the vehicle, but on average it should be changed every 100,000 miles.

What are the benefits of replacing a timing belt?

Increase in Horse Power. Taking your vehicle to a timing belt replacement shop and changing the timing belt as scheduled will benefit you in many ways.
Better Fuel Economy. Changing the timing belt when needed will dramatically increase your gas mileage.
Lower Auto Repair Cost.

What happens if the timing belt breaks on a car?

There is no belt to change. These are the minority of engines today. Then there are two different types of valve and head designs. One design has valves that will be slammed by the pistons if the belt breaks. These are called “interference engines.”

How long does a Honda timing chain last?

The timing chain should last you the life of your engine although there are occasions when it could fail and wear out on you. Typically, however you can expect the time you change the last over 200,000 miles. Timing belts are usually composite rubber belts with teeth on the inside to grip the gears of the camshaft and the crankshaft.

How much does it cost to replace a timing belt?

The average cost for a timing belt replacement is between $498 and $669 . Labor costs are estimated between $319 and $403 while parts are priced between $179 and $266 .

Can you tell if a timing belt has been changed?

It is difficult to determine if a timing belt has been replaced. A sticker comes with many new belts to go on the outside of the timing cover with a place for date and mileage. That would be the first thing to look for. If there is no sticker the only way to tell is to pull the timing cover off, which is quite a bit of labor.

When does the timimng belt need to be replaced?

Your timing belt should be replaced every 50,000-70,000 miles, depending on your car’s make and model.

How often does timing belt need to be changed?

Your timing belt should be replaced every 50,000–70,000 miles, depending on your car’s make and model.

When does the timing belt fail on a Subaru Outback?

For a number of drivers, the timing belt failed at around 60,000 miles to 70,000 miles. The official word on the lifespan of a timing belt in your Subaru Outback is between 60,000 miles and 90,000 miles so this problem is within the range, but it’s still annoying that it happens almost as soon as the timing belt was scheduled to where else.

When to replace timing belt on Ford Focus?

If you have a Ford Focus you can expect to replace the timing belt between 60,000 miles and 90,000 miles. The manual for the Volkswagen Jetta says that you can keep your timing belt until 120,000 miles. According to the US Department of Transportation, the average driver in America travels 13500 miles per year.

Most models, like those with 3.2-liter engines, do not need their timing belt replaced until they hit 92,000 miles or after six years, whichever comes first. Others can go as long as 105,000 miles before the belt has to be replaced. Most Audis have a recommended timing belt replacement at 110,000 miles.

When does the timing belt on a water pump fail?

For one, the water pump’s lifespan is typically 60,000-100,000 miles. And if the timing belt fails, whether due to simple age, or the failure of a tension pulley or bearing, the water pump will likely fail along with it.

In an interference engine, the valves and piston share the same airspace and the timing belt keeps them from touching. This is why you’ll have a major engine failure on your hands if the belt breaks or skips.

When to replace timing belt on Toyota Avalon?

Therefore, timing belts must be replaced on a pre-determined schedule. The question is, what’s the proper time to do so for your specific vehicle? Find your model below: If you’re the owner of an Avalon with a V6, made between 1995 to 2004, the belt should be replaced by 60k miles.

Is it really necessary to replace your timing belt?

But unlike the shady mechanic who attempts to change your engine air filter every oil change, replacing the timing belt is absolutely crucial . The timing belt is an integral part of your engine and, if it fails, so does your engine, causing your car to shut down.

How can I tell if timing belt was really replaced?

Glazing is when the timing belt has a shiny or glossy appearance on the underside, which means the belt has gone stiff and isn’t providing the flexibility needed . Your mechanic will check this by trying to put an indent into the surface of the belt . If it doesn’t leave a mark the belt needs replacing.

How often do you need to change your timing belt?

Some manufacturers recommend changing the timing belt every 60,000 miles, others recommend longer intervals. The timing belt connects the crankshaft to the camshafts so valves open and close at the right time.

What is suggested interval for timing belt replacement?

Your timing belt should be replaced every 50,000-70,000 miles , depending on your car’s make and model. Also, make sure you understand if your engine is an interference engine or a non-interference engine. In an interference engine, the valves and piston share the same airspace and the timing belt keeps them from touching. This is why you’ll have a major engine failure on your hands if the belt breaks or skips.

Why is the timing belt called a timing belt?

A timing belt is the most important belt in the engine. It’s a toothed belt that runs the engine camshaft(s). It’s called a timing belt because it precisely “times” the up-and-down movement of the pistons with opening of the valves. Timing belt.

What are the symptoms of a stretched timing belt?

Symptoms of a stretched timing belt include a lack of power, slow pick-up and the Check Engine light coming on. In some cars, a stretched timing belt can also produce a dull rattling noise coming from the timing belt area. Can a timing belt last past the recommended interval? Yes, in some cases.

How do I know when to replace my timing belt?

To know when to replace a timing belt in your car, you need to know your car’s engine size, because not all engines have a timing belt. The recommended replacement intervals are listed in the maintenance schedule Timing belt. See more illustrations: Fig 1. Fig 2. Fig 3. Timing belt animation

When did the timing belt increase to 100, 000 miles?

However, in 2003 VAG raised the timing belt interval to 100,000 miles. This was done because of improvements made to the timing belt idler bearing (an increased ID from 47mm to a 60mm), and a stronger timing belt (carbon aramid material).

A timing belt is the most important belt in the engine. It’s a toothed belt that runs the engine camshaft(s). It’s called a timing belt because it precisely “times” the up-and-down movement of the pistons with opening of the valves. Timing belt.

When to change timing belt on Audi A4?

It is our recommendation to closely inspect all timing belt components before the recommended interval. Play it safe, changing your timing belt may seem expensive. However, choosing to exceed your timing belt service interval is risky and can lead to unknown repair costs that will far exceed typical timing belt replacement service cost.

However, in 2003 VAG raised the timing belt interval to 100,000 miles. This was done because of improvements made to the timing belt idler bearing (an increased ID from 47mm to a 60mm), and a stronger timing belt (carbon aramid material).

When to change timing belt on Jetta A4?

2.0L 8 Valve – The most recent recommend timing belt replacement interval for 2.0L 8 Valve models is 75,000 miles. • 1999-2004 VW Jetta change interval is 75,000 miles for 2.0L 8V (US) A4 chassis (aka Mark IV). • 1999-2006 VW Golf change interval is 75,000 miles for 2.0L 8V (US) A4 chassis (aka Mark IV).

How often to replace timing belt?

How much to change timing belt?

A typical timing belt will only cost between $25 and $50, but the repair takes at least a few hours. The labor cost to replace a timing belt can range from $200 – $900.

Most vehicle maintenance in general mentions whichever comes first. I’ll have to confirm in the user manual tomorrow, but seems the Hyundai recommendation (as offered by mechanic shop) says timing belt replacement at 48 months or 60k miles (37500 miles under severe conditions).

If you have a Ford Focus you can expect to replace the timing belt between 60,000 miles and 90,000 miles. The manual for the Volkswagen Jetta says that you can keep your timing belt until 120,000 miles. According to the US Department of Transportation, the average driver in America travels 13500 miles per year.

What happens if the timing belt goes on a non interference engine?

Non-interference engines do not risk this contact if the timing belt goes. Nonetheless, a failed timing belt will leave you stranded with either type of engine, so it is important to know the replacement interval for your specific model and have your belt replaced accordingly.

What causes an oil leak on a timing belt?

Oil Issues: You may have problems with oil leaks and bad oil pressure when there is a problem with your timing belt. This can happen because the bolts securing your timing belt cover come loose and oil will leak around the gasket between the engine block and the timing belt cover.

When is the best time to change the timing belt?

They can go as long as 100,000 miles although it’s always a good idea to change it before then. Belt failure can cause extensive damage to the valves, pistons and other internal parts of the engine. The cost of changing the timing belt is a bargain when you consider the cost to replace the entire engine.

What happens when the timing belt snaps on a car?

In a non-interference engine, the pistons and valves don’t occupy the same space, so if the timing belt snaps, no valve or cylinder damage occurs. You just pop a new belt on, and the engine should theoretically drive normally.

Can a bad timing belt cause engine damage?

However, if the issue is due to the timing belt being broken, it may also result in other internal engine compartment damage. In many cases, the timing belt will break while the engine is running.

When to change timing belt on Ford Focus?

Newer models use timing belts made of polyurethane and Kevlar for long life and durability. They can go as long as 100,000 miles although it’s always a good idea to change it before then. Belt failure can cause extensive damage to the valves, pistons and other internal parts of the engine.

How is the timing belt on an Acura TL?

A timing belt is covered by plastic or metal covers. Your mechanic can remove one of the covers and visually check the timing belt condition. For example, this timing belt in the photo belongs to the Acura TL with 52,000 miles. This timing belt is still in good shape.

Can you inspect the teeth of a timing belt?

Next flip the belt over slightly to inspect the teeth. You can do this at the point that’s farthest away from both pulleys. You may not be able to actually “flip” the belt, but you can sneak some looks at the underside of the belt all the way around.

Is the timing belt on a Toyota Highlander Never changed?

We came across a number of high-mileage cars with a timing belt that has never been changed. In fact, as we worked on this article, we discussed the Toyota Highlander belonging to one of our colleagues. It had almost 200K miles and the timing belt has never been changed.

Where can I find a rubber timing belt?

Rubber timing belts are found in the vast majority of engines found in small cars and SUVs, particularly 4 cylinder – but some cars don’t have timing belts. In larger engines that put out more power the timing belt is replaced with a timing chain, which looks much like a bicycle chain.

Non-interference engines do not risk this contact if the timing belt goes. Nonetheless, a failed timing belt will leave you stranded with either type of engine, so it is important to know the replacement interval for your specific model and have your belt replaced accordingly.

What are the indicators of a bad timing belt?

Ticking noise coming from the engine. The timing belt is attached by way of a series of pulleys to the engine’s crank and cam shaft. The crankshaft powers the engine’s connecting rods which are attached to pistons inside the combustion chamber. The camshaft operates the cylinder head valves and rocker arm assembly, which…

Gates also recommends a 60k mile interval replacement…even when the manufacturer says 100k miles replacement interval. Gates’ incentive is to sell as many belts as possible.

How much does it cost to replace a timing belt on?

“Now, more people know about it and what can happen when it breaks.” Replacing a timing belt for preventive reasons typically costs $500 to $900 . However, replacing a broken timing belt may cost up to $2,000 or more if it caused damage to the valves, pistons or water pump.

When do I need to replace my timing belt?

Unless your vehicle has a timing chain, or for some reason you’ve replaced your timing belt on a different schedule, it’s vital to replace the belt at the intervals listed.

When to replace timing belt on Toyota 4Runner?

4Runner Owners of V6 4Runners from 1990 to 2002 will need to replace their timing belt every 60k, while owners of V8 engines from 2003 to 2009 need to think about a belt replacement every 90k miles.

When to replace timing belt on Toyota Sequoia?

Owners of Sequoias from 2008 and beyond with a 5.7 V8 have chains, as do 4.6 V8 Sequoias from 2010 to 2012. All Venzas manufactured from 2009 to present day have a chain, so don’t stress about the belt. If you own a 2000 to 2004 V6 Tundra get ready for a replacement by 60k miles.

When to replace timing belt on Toyota Venza?

All Venzas manufactured from 2009 to the present-day have a chain, so don’t stress about the belt. If you own a 2000 to 2004 V6 Tundra get ready for a replacement by 60k miles. For a 4.7 V8 engine made between 2000 and 2009, prepare to replace the belt when the mileage reaches 90k miles.

Why does it take so long to replace timing chain?

The total replacement time depends on the type of timing apparatus used by your engine. In general, timing chains take a lot longer to replace than belts due to their placement inside the front of the engine. Technicians take the time to precisely time your engine to protect the internals and ensure it creates the expected amount of power.

What causes the timing belt to degrade over time?

Similar to a serpentine or v-belt, your timing belt will degrade over time and with usage. Unlike standard drive belts, wear on your timing belt is not visible because it is housed inside the engine, behind the timing cover. Time, temperature and stress cause the belt to degrade and if not replaced at…

Can a timing belt last 200, 000 miles?

Other vehicles that have had long live timing belts include things like a Plymouth Voyager that topped 270,000 miles and a Chrysler LeBaron that got to 190,000 miles on the original timing belt. Hondas have been known to last for a while with timing belts up to 180,000 miles.

When to replace timing belt on Toyota Camry?

On average you can expect a timing belt to last 60,000 miles to 100,000 miles. This will change based on the make, model, and year of your vehicle. Every manufacturer has their specific recommended years or mileage to replace the belt. For instance, Toyota recommends that the Camry replace their timing belts after 60,000 miles.

When to replace timing belt in Hyundai Accent?

Most vehicle maintenance in general mentions whichever comes first. I’ll have to confirm in the user manual tomorrow, but seems the Hyundai recommendation (as offered by mechanic shop) says timing belt replacement at 48 months or 60k miles (37500 miles under severe conditions). I have a 2009 Hyundai Accent bought new from dealer (in another state).

The US service manual states that the timing belt should be replaced at 72 months (6 years) or 90,000 miles.

When to change the timing belt on an NSX?

When Should I Change The Timing Belt? The US service manual states that the timing belt should be replaced at 72 months (6 years) or 90,000 miles. The vast majority of NSXs hit 6 years well before they are anywhere near 90k miles so many owners are wondering if they really need to change the belt at 6 years.

What are the warning signs of a broken timing belt?

Engine Will Not Turn Over – When you try to start your car, can hear the starter motor but the engine will not turn over in addition to any of the above warning signs – it is quite possible that damage has been done to the engine as a result of a broken or snapped timing belt.

Is the timing belt made out of rubber?

Your timing belt, also known as a cam belt, is an essential part of your car. Here’s why you need to keep it in good working order. The timing belt in your car is made out of tough rubber with grooves or teeth running along the inside edge.

When is the best time to replace the timing belt?

When they do, serious engine damage could be the result. That’s why it’s important to replace the timing belt before it slips or breaks. The schedule for timing belt replacement depends upon the make of your vehicle. Recommended replacement intervals range between 60,000 to 100,000 miles.

Which is better 105K or 90K timing belt change?

Instead of 105k intervals for the timing belt change, I think 90k intervals are more appropriate because I will have to drain the coolant and remove the radiator to access the belt and I’ll be doing a coolant flush for my 90k service anyway, so why wait another 10k miles just do go through that messy process again?

What happens if I snap my timing belt?

If it’s an interference engine, the timing belt keeps the values and pistons from smashing into each other. If the timing belt snaps, you’ll end up with bent valves (at the very least), cylinder head or camshaft damage, and possibly damage to the piston and cylinder wall.

How does the timing belt in a car work?

Timing belts work to keep your engine in sync. There are hundreds of moving parts in your car’s engine, and it’s crucial that they all work in time. The timing belt controls the timing of the crankshaft and camshafts (hence it sometimes being referred to as a cam belt). You should bear in mind that not all vehicles actually utilize a timing belt.

When to replace timing belt on Toyota Sienna?

Those that own a 2011 or 2012 4-cylinder Sienna are in luck, as your model year has a chain- so do V6s built from 2007 on. Highlanders manufactured from 2001 to 2007 with a V6 engine require a new belt every 60k miles. Owners of 4-cylinder Highlanders from 2001 to 2007 and V6s from 2008 on have chains, however, no belt is needed.

When to replace timing belt on Toyota Yaris?

Yaris’ entire run has been simplified when it comes to belt maintenance, as every Yaris manufactured is equipped with a chain. If you drive a Sienna made from 1998 to 2006, with a V6, then be prepared to replace that timing belt every 60k like clockwork.

What does the timing belt do in an engine?

The timing belt is an internal engine component that rotates the engine’s cam and crankshaft in sync and ensures each cylinder fires at the appropriate time.

Most vehicle maintenance in general mentions whichever comes first. I’ll have to confirm in the user manual tomorrow, but seems the Hyundai recommendation (as offered by mechanic shop) says timing belt replacement at 48 months or 60k miles (37500 miles under severe conditions). I have a 2009 Hyundai Accent bought new from dealer (in another state).

How often should the timing belt be changed on a Jeep Renegade?

We don’t have the diesel in our Renegades over here, so I don’t have a good answer. My manual says (for petrol) cambelt should be changed every 40k miles or 4 years regardless of mileage if car has been used in urban areas or cold climate so I would get it done now with the water pump as suggested.

When did my timing belt need to be replaced?

My timing belt needed replacement at about four years, too. Drive belt was replaced at the same time. Mine is a 2002 Hyundai Accent which is still going strong at 66,000 miles. If it would only last forever. . . 32 mpg around town, 38 on the road, a manual transmission. “Whichever comes first” is definitely implied.

What happens if the timing belt breaks while driving?

In an interference engine, if a timing belt breaks while driving, there is a good chance that the engine might be severely damaged. A non-interference engine will stall if a timing belt breaks, but further damage might be limited.

We came across a number of high-mileage cars with a timing belt that has never been changed. In fact, as we worked on this article, we discussed the Toyota Highlander belonging to one of our colleagues. It had almost 200K miles and the timing belt has never been changed.

How much does it cost to replace timing belt on Honda Accord?

received a Timing Belt Replacement. Honda Accord Timing Belt Replacement costs $630 on average. What is a timing belt and how does it work? An engine timing belt is a fiber reinforced, toothed drive belt manufactured using durable compounds such as highly saturated nitrile.

How often should I change my timing belt?

However, choosing to exceed your timing belt service interval is risky and can lead to unknown repair costs that will far exceed typical timing belt replacement service cost. 1.9L TDI ALH – The most recent recommend timing belt replacement interval for VW 1.9L TDI ALH models is 100,000 miles.

When do you change the timing belt on an Acura?

Acuras have one of the longest intervals for timing belt replacement. Most models, like those with 3.2-liter engines, do not need their timing belt replaced until they hit 92,000 miles or after six years, whichever comes first. Others can go as long as 105,000 miles before the belt has to be replaced.

When is a drive belt should be replaced in your car?

Most cars have one or two drive belts. When a car has only one drive belt, it might be called a serpentine belt. For example, this Ford engine in the first photo has only one drive or ‘serpentine’ belt. The car in the next photo has two drive belts.

How often should a cam belt be replaced?

There’s no set rule for when to replace your cam belt. It depends on the make and model of your car, as well as how much you drive the car. It’ll usually need to be replaced more than once over the course of a vehicle’s lifetime.

How many miles does a Mazda drive belt last?

Fig1, Fig2. The Mazda has two drive belts. Fig3. A drive belt is made of long-lasting rubber-based material. In most cars, a drive belt is replaced between 40,000 and 70,000 miles, however, we have seen cases where the drive belt lasted over 100k miles.

How often do timing belts need to be replaced?

Additionally, internal combustion engines have a timing belt or chain that plays a critically important role in engine function. On most vehicles with a rubber timing belt, the belt isn’t visible for inspection but it does need to be replaced every 100,000 miles, or at an interval based on vehicle manufacturer recommendations.

Most cars have one or two drive belts. When a car has only one drive belt, it might be called a serpentine belt. For example, this Ford engine in the first photo has only one drive or ‘serpentine’ belt. The car in the next photo has two drive belts.

What does the timing belt on a car do?

Timing belts. The timing belt is also sometimes called a camshaft drive belt or a Gilmer belt. It is a notched belt, made of rubber, that enables the crankshaft to turn the camshaft, and opens and closes the engine valves synchronously with the pistons. In late model vehicles, the timing belt has essentially replaced the metal timing chain.

When do you replace the serpentine belt on your car?

This belt tensioner should be inspected along with the serpentine belt, and considered for service or replacement at the same time. On vehicles with a manual belt tensioner, the tension should be adjusted as needed. Are there other belts that need to be replaced?

Where is the timing belt on a transverse 4 cylinder engine?

On most transverse four-cylinder engines, you’ll have to remove the passenger-side motor mount in order to gain access to the timing belt. This means the entire powertrain needs to be supported in that area while you’re working. And finally, getting to the lower portion of multipiece timing belt covers usually requires underbody access.

How much does it cost to replace timing belt on Saturn Vue?

The average cost for a Saturn Vue timing belt replacement is between $775 and $857. Labor costs are estimated between $308 and $390 while parts are priced at $467. Estimate does not include taxes and fees.

Why do you need to replace timing belt on Toyota Highlander?

The timing belt connects the engine’s camshaft and crankshaft, and ensures that they maintain proper timing to keep the engine running smoothly. When you have it replaced, it might be smart to have related work done to help save on labor.

What does a timing belt do in an engine?

A timing belt lets the camshaft or camshafts if your engine has 2 rotate in a synchronized manner with the crankshaft. The camshafts are the ones actuating the valves opening and closing while the crankshaft moves the pistons.

How do you remove the timing belt on a DOHC engine?

Before removing the belt, you need to tie the camshafts ends together using the specific tool. 1- Block the right hub by inserting a screwdriver in the brake disc from beneath. 2- Put the 4th or 5th or 6th gear. 3- Use the left wheel to rotate the engine and watch the camshafts ends.

https://www.youtube.com/watch?v=jt_rKX9TQVI

What’s the average life of a timing belt?

Depending on what schedule you may read, including information distributed by the manufacturers themselves, the average life span of a timing belt is between 60,000 and 105,000 miles or after 7 to 10 years regardless of mileage. Most manufacturers state that going more than 80,000 to 90,000 miles on the original belt is flirting with danger.

How old is the timing belt on a gates car?

Look at the production tag on the door jam and odds are you will find that the car was likely manufactured in the summer or fall of 2008. This means it’s about 5 years old and environmental factors such as extreme cold and heat play a part also. Gates never lists the time – which I’ve always thought is very odd

Can a timing belt fail on a Mercury Villager?

But on older Escorts (up to 1985) with 1.6L engines as well as 1989 and up Probes with 2.0L or 2.2L four cylinder engines, a timing belt failure will usually bend a bunch of valves. The same goes for the Mazda-built 3.0L V6 in the Mercury Villager.

How much does a broken timing belt cost?

If the timing belt breaks on an interference engine while it’s running, the result is often catastrophic engine damage costing around $2,500 to $4,000. Other engines are designed with more space at the top of piston travel. Those engines can survive a broken or out-of-time timing belt. They’re referred to as “free-wheeling.”

The timing belt was done at 90K miles like it should have been, 6 years ago. SO, It is going to need replaced again soon (and I will do the water pump, pulleys, etc…). I will wait till I hit 190-200K before I do it.

How much does it cost to replace timing belt on Toyota Land Cruiser?

Toyota Land Cruiser Timing Belt Replacement costs $755 on average. Following is a breakdown of the labor and parts estimates. What is a timing belt and how does it work? An engine timing belt is a fiber reinforced, toothed drive belt manufactured using durable compounds such as highly saturated nitrile.

When to replace timing belt on Acura RDX?

The timing belt system includes idler pulleys and a belt tensioner. These components should be replaced along with the belt. On some cars, the timing belt drives the engine’s water pump. Mechanics will usually recommend replacing the water pump at the same time that the timing belt is replaced.

Where does the oil leak come from on the timing belt?

If you having a timing belt and notice an oil leak coming from the front of your engine, try reading our article about camshaft seal replacements to see if that is where your leak is. Since the timing cover must surround the entire timing chain, which runs from the engine crank up to the camshafts, it’s a large cover with a large gasket.

Why does a camshaft seal need to be replaced?

Worn out cam seals need to be replaced to prevent oil loss. The camshaft seal is designed to seal the end of the camshaft. Over time, seals harden and begin to leak. Seals can also fail from excess crankcase pressure, but that happens much less frequently. A failed camshaft seal can result in oil loss and potential timing belt contamination.

The timing belt in your vehicle is a crucial part of proper engine function. It connects the upper and lower parts of your engine to keep it performing in sync. Timing belts begin to stretch and decrease in function over time, and usually need to be changed somewhere between 60,000 and 90,000 miles.

Where can I buy genuine Toyota timing belts?

Shop from the list of timing belts below. OEM Toyota timing belts are exact-fit replacement belts. Factory timing belts are made from better quality materials than aftermarket belts. All genuine timing belts and hoses meet Toyota’s factory standards for performance. At Olathe Toyota Parts Center, you’ll save money with our wholesale pricing.

2.0L 8 Valve – The most recent recommend timing belt replacement interval for 2.0L 8 Valve models is 75,000 miles. • 1999-2004 VW Jetta change interval is 75,000 miles for 2.0L 8V (US) A4 chassis (aka Mark IV). • 1999-2006 VW Golf change interval is 75,000 miles for 2.0L 8V (US) A4 chassis (aka Mark IV).

Is it expensive to change timing belt on Audi A4?

Play it safe, changing your timing belt may seem expensive. However, choosing to exceed your timing belt service interval is risky and can lead to unknown repair costs that will far exceed typical timing belt replacement service cost.

When is your Freelander due a timing belt ( cambelt ) change?

When is your Freelander due a timing belt (cambelt) change? The time to change your timing belt is based on either a mileage or a time e.g. 72,000 miles or 6 years. You should change the belt at whichever of these comes soonest.