When did the Jeep Wrangler transfer case come out?
Modern transfer case models: Jeep has produced a large variety of transfer cases throughout the years, but in 2003 the NV241OR or Rock-Trac was released and provided a significant leap in transfer case gearing, allowing Wranglers to run a 4:1 low-range gear ratio from the factory and a tremendous amount of torque while out on the trail.
Is there a transfer case for the Grand Wagoneer?
This transfer case was offered in the FSJ Grand Wagoneer. The NP transfer cases are easily identified by the numbering in its red and silver tag on the back. The model number and gear ratio will be listed. Let TNT Transfer Case help you find the right re-built transfer case.
What are the splines on a Jeep transfer case?
The stock rotation on the New Process transfer case depends on the year of the vehicle and the stock transmission used. The rotations are approximately 13 or 23 degrees. The input shaft spline on these transfer cases will be either 21 or 23 splines.
Where is the transfer case on a 4WD car?
As previously mentioned, the transfer case is found on vehicles with AWD or 4WD capability and is integral in allowing drivers to switch to these modes of operation. A typical 4WD transfer case is found at the rear of the transmission. It is powered by the transmission output shaft and operates much like a secondary transmission.
What kind of transfer cases do jeeps use?
We offer a wide selection of high quality remanufactured transfer cases for Jeep vehicles including the following models: Cherokee, CJ5, CJ7, Comanche, Grand Cherokee, Grand Wagoneer, J10, J20, Scrambler, Wagoneer and Wrangler models.
This transfer case was offered in the FSJ Grand Wagoneer. The NP transfer cases are easily identified by the numbering in its red and silver tag on the back. The model number and gear ratio will be listed. Let TNT Transfer Case help you find the right re-built transfer case.
How long is the warranty on a Jeep transfer case?
Transfer Case Assemblies are delivered with 12 month unlimited mile warranty, from time of purchase. When ordering please provide vehicle make, year, model,, transfer case model number and assembly numbers off existing transfer case tag, this information will ensure that you receive a direct drop in replacement.
Where is the NP231 on a Jeep transfer case?
The 23 spline version is used behind the AX-15 and the 21 spline is used behind the AX-5 and the BA 10/5. The output for the front driveshaft is on the drivers side. Low range is 2.72 and high is 1.00. Identifying it: Spotting the NP231 is easy thanks to the red and silver tag on the rear half of the case.
Modern transfer case models: Jeep has produced a large variety of transfer cases throughout the years, but in 2003 the NV241OR or Rock-Trac was released and provided a significant leap in transfer case gearing, allowing Wranglers to run a 4:1 low-range gear ratio from the factory and a tremendous amount of torque while out on the trail.
How to do Jeep transfer case shifting-shifting it smooth?
2) If the transfer case goes into Neutral with the engine running, and you can’t get it into the next mode without a grinding sound…just cut the ignition key, turn off the engine, shift into the mode you need, and then you can restart the engine. You have to “skip by” Neutral in the transfer case if you want smooth shifts Questions?
Where does the shifter cable connect to the transfer case?
The pics are before and after.. the White plastic is older broken one. Very much a needed product. This will fit the 2009 year range JK/JKU where the shifter cable for 4wd connects to the transfer case under the vehicle. Jeep will sell you an entire cable. Parts stores sell you “kits”.
What kind of transfer case does JK Rubicon Wrangler use?
Teraflex 241-OR 2 Low Kit: is specifically designed for 2007 – 2017 JK Rubicon Wranglers and provides an intermediate shifting level between Hi and Lo. This could be a crucial option during tight hairpin turn while on the trail that could lead to binding and possible damage if enough torque is applied.
What kind of transmission does a Jeep Wrangler have?
The 42RLE is a medium duty overdrive, 4-speed, automatic transmission that lives in Wranglers born from 2003 to 2011. These transmissions feature four forward gears including one overdrive gear. With an aluminum housing, the NV1550 was a short-lived 5-speed manual transmission for Jeep Wranglers.
What are the benefits of a wrangler transfer case?
Having the option to switch from 2wd to 4wd and really dig into a trail is one of the great benefits of owning a Wrangler. When upgrading your wrock crawler it is important to choose a build that is transfer case friendly so that you can reap the benefits of having the ultimate rock crawler.
Which is the weakest Jeep transfer case to get?
“The NP 207 is one of the weaker Jeep transfer cases, but can be upgraded. The NP 207 has an aluminum case and chain driven planetary reduction. Thankfully the NP 207 was installed behind some of the weakest Jeep power trains every used.
Teraflex 241-OR 2 Low Kit: is specifically designed for 2007 – 2017 JK Rubicon Wranglers and provides an intermediate shifting level between Hi and Lo. This could be a crucial option during tight hairpin turn while on the trail that could lead to binding and possible damage if enough torque is applied.
The 23 spline version is used behind the AX-15 and the 21 spline is used behind the AX-5 and the BA 10/5. The output for the front driveshaft is on the drivers side. Low range is 2.72 and high is 1.00. Identifying it: Spotting the NP231 is easy thanks to the red and silver tag on the rear half of the case.
As previously mentioned, the transfer case is found on vehicles with AWD or 4WD capability and is integral in allowing drivers to switch to these modes of operation. A typical 4WD transfer case is found at the rear of the transmission. It is powered by the transmission output shaft and operates much like a secondary transmission.
Is there a 12 month replacement transfer case?
Rebuilt remanufactured replacement transfer cases with 12 month, unliminted mileage warranties are available for the following vehicles: Chevrolet/GM , Dodge, Ford, Jeep & Import . All rebuilt transfer case get new seals, bearings, chains, fork pad, encoder motors and viscous couplers.
Where is the model number on a transfer case?
Weather your looking for rebuilt transfer cases, remanufactured transfer cases, new transfer cases or transfer case parts, the following table is provided to assist you in identification of your existing transfer case model number. To be sure check tag typically located on rear of transfer case, near where the rear drive shaft exits.
Can a transfer case be built by New Process Gear?
Any transfer case that was built by New Process Gear will be included in the New Venture transfer case line for pur- poses of this article. One of the greatest problems fac- ing the transmission rebuilder and parts suppliers in the last decade or so is the tremendous proliferation of new units.
“The NP 207 is one of the weaker Jeep transfer cases, but can be upgraded. The NP 207 has an aluminum case and chain driven planetary reduction. Thankfully the NP 207 was installed behind some of the weakest Jeep power trains every used.