What was the Hyundai Elantra crankshaft position sensor problem?
On 3/4/2005, while driving on an interstate highway, the car stalled and wouldn’t immediately start. It did start later. I was towed to a dealer, which replaced the crankshaft position sensor. On 4/21/2005, I got to my parked car to find that it wouldn’t start for 10-15 minutes.
Are there any problems with the Hyundai Elantra?
Hyundai Elantra owners have reported 3 problems related to crankshaft position sensor (under the electrical system category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Hyundai Elantra based on all problems reported for the Elantra. The car sensors keep going up.
Why does my Hyundai Elantra stall at low rpm?
Insert key in ignition and turn then nothing happens. It takes a couple tries to turn on the vehicle at various times. Car stalls when coming to a stop or at low RPMs. Then RPM gage doesn’t work (no engine light initially).
Where can I get a Hyundai Elantra engine replaced?
The vehicle was towed to regional Hyundai located at 2380 w kenosha st, broken arrow, ok 74012, to be diagnosed. The contact was informed that the engine was faulty and needed to be replaced.
On 3/4/2005, while driving on an interstate highway, the car stalled and wouldn’t immediately start. It did start later. I was towed to a dealer, which replaced the crankshaft position sensor. On 4/21/2005, I got to my parked car to find that it wouldn’t start for 10-15 minutes.
Hyundai Elantra owners have reported 3 problems related to crankshaft position sensor (under the electrical system category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Hyundai Elantra based on all problems reported for the Elantra. The car sensors keep going up.
Insert key in ignition and turn then nothing happens. It takes a couple tries to turn on the vehicle at various times. Car stalls when coming to a stop or at low RPMs. Then RPM gage doesn’t work (no engine light initially).
The vehicle was towed to regional Hyundai located at 2380 w kenosha st, broken arrow, ok 74012, to be diagnosed. The contact was informed that the engine was faulty and needed to be replaced.
How to check no start, no crank condition Hyundai?
Turn the ignition key to the ON position or push the Start/Stop Button two times. 2. Using the factory or enhanced scan tool, check for the DTCs listed above. Record the DTCs and description, then delete the DTCs. 3. Select the live data parameter for the “Shift Lever Switch.”
Why does my crank shaft sensor keep going up?
The car sensors keep going up. The crank shaft sensor is not sending a signal that the car is in motion. When pull out on to a street or highway and press the accelerator sometimes my car will stall or drop speed. I fear someone will end up running into the back of me.
What to do if your crankshaft sensor is not working?
Issues with the crankshaft sensor can quickly lead to problems that affect the drivability of the vehicle. For this reason, if you suspect your crankshaft position sensor has an issue, have the vehicle inspected by a professional technician right away. They will be able to diagnose your car and replace your crankshaft position sensor if necessary.
How does the crankshaft position sensor work in a car?
It monitors the position and rotational speed of the crankshaft and sends the information to the engine control unit so it can make appropriate adjustments based on operating conditions.
When to replace the spark plugs on a 2016 Hyundai Elantra?
According to the owner’s manual of a 2016 Hyundai Elantra, the spark plugs should be replaced every 105,000 miles or 84 months. Keep in mind that depending on your driving style and conditions, the spark plugs may last longer or need to be replaced as early as 60,000 miles.
Why is the crank sensor on my car not working?
This is because the crankshaft position sensor gives the signal for both fuel and spark, and it is very common for this sensor to fail on this vehicle. First, check the wiring and connector to the crank sensor. If that is ok, replace the sensor:
Where are the spark plugs on a Hyundai Elantra?
Replacing spark plugs is straightforward if you know where they are located, which is usually near the top of the engine. In some cases, you may need to remove an engine cover first, so check the owner’s manual first. With the correct replacements already in hand, swap out the old plugs for the new ones in order.
What is the diagnostic code for Hyundai Elantra?
If you have a CEL (check engine light) or SES (service engine soon) warning on your gauge cluster, use an OBDII scanner (also known as an “OBD2 scan tool”) to check for an ignition coil related DTC (diagnostic trouble code) such as P0350, P0351, P0352, P0353 and P0354.
This is because the crankshaft position sensor gives the signal for both fuel and spark, and it is very common for this sensor to fail on this vehicle. First, check the wiring and connector to the crank sensor. If that is ok, replace the sensor:
When to change the spark plug on a Hyundai?
If your Hyundai check engine light is on or you have over 100,000 miles on your Hyundai, it may be time to change the spark plugs. Park, your Hyundai in a safe area, set the parking brakes, and allow the engine to cool down.