What size is an M30?
Size Chart
| Bolt size | Size | Tolerance |
|---|---|---|
| M30 | 46mm | 46.10 |
| 1-1/8″UNC | 1-13/16″ | 46.13 |
| 47mm | 47.10 | |
| 1-1/8″BSW | 47.34 |
What size thread is a 30mm nut?
Coarse Thread Bolts
| NOM. DIA. | PITCH mm | NUT Size |
|---|---|---|
| M16 | 2 | 24 |
| M18 | 2.5 | 27 |
| M20 | 2.5 | 30 |
| M22 | 2.5 | 32 |
What size is a M20 bolt head?
Dimensions for DIN931 Hex Head Bolt
| Diameter (d) | Pitch | Across Flats (s) |
|---|---|---|
| M18 | 2.5mm | 27mm |
| M20 | 2.5mm | 30mm |
| M22 | 2.5mm | 32mm |
| M24 | 3.0mm | 36mm |
What size is an M16 bolt?
Metric Hex Bolt Dimensions
| NOMINAL SIZE (D) | BODY DIAMETER | ACROSS CORNERS |
|---|---|---|
| m10 | 10.00 | 17.77 |
| m12 | 12.00 | 20.03 |
| m14 | 14.00 | 23.35 |
| m16 | 16.00 | 26.75 |
What is the diameter of m30 bolt?
Metric Hex Bolt Dimensions
| NOMINAL SIZE (D) | BODY DIAMETER | ACROSS CORNERS |
|---|---|---|
| m16 | 16.00 | 26.75 |
| m20 | 20.00 | 32.95 |
| m24 | 24.00 | 39.55 |
| m30 | 30.00 | 50.85 |
What size is a M16 bolt?
Metric Hex Bolt Dimensions
| NOMINAL SIZE (D) | BODY DIAMETER | ACROSS THE FLATS |
|---|---|---|
| m14 | 14.00 | 20.67 |
| m16 | 16.00 | 23.67 |
| m20 | 20.00 | 29.16 |
| m24 | 24.00 | 35.00 |
What diameter is M16 thread?
| Tap size | Basic major dia (mm) | Basic major dia (inch) |
|---|---|---|
| M14 x 1.5 | 14mm | .5512 |
| M16 x 2 | 16mm | .6299 |
| M16 x 1.5 | 16mm | .6299 |
| M18 x 2.5 | 18mm | .7087 |
What is the diameter of a bolt?
Typically, machine bolt sizes range from 1/4″ to 1 1/4″ for square heads and 3/8″ to 1 3/4″ in diameter for hex heads, and lengths span from about 3/4″ to 18″ for square and 6 1/2″ to 24″ for hex heads. Measure length from under the head to the threaded end of the bolt.
What is the difference between standard and metric bolts?
For both metric and standard bolts, the head size is the distance across the flats. For standard bolts, the head size is measured in inches or fractions of an inch. For metric bolts, head size is measured in millimeters. However, metric bolt head size is measured in millimeters.
What are the dimensions of an U – bolt?
These are essentially a single piece of mild or stainless steel bar that is threaded at the end of either side and then shaped as the letter U. U Bolt Dimensions range from M6 to M20 in terms of thread diameter, with various lengths and specials also available.
What is metric bolt length?
Metric bolt sizes can also be listed as M6x1x25. This bolt is 6mm in diameter, has a distance of 1mm between threads and is 25mm in length. The grade or strength of a bolt should be inked or stamped on the head. It is not always there, so do not be overly concerned if you have bolts without a stamp.
https://www.youtube.com/watch?v=WDEIwclF0Gg