What size drill bit is #26?
Drill Bit Size Chart
| Size | Decimal Equivalent | Size |
|---|---|---|
| 1/64″ | 0.0156 | 3.60 mm |
| .40 mm | 0.0157 | 27 |
| 78 | 0.016 | 3.70 mm |
| .42 mm | 0.0165 | 26 |
What size is 25 drill bit?
| To Tap This Size Screw Or Bolt: | Use This Drill Bit: | (Closest Fractional:) |
|---|---|---|
| 1/2-13 NC | 27/64″ | 27/64″ |
| 12mm-1.25mm* | 10.9mm | 27/64″ |
| 1/2-20 NF | 29/64″ | 29/64″ |
| 1/2-24 NS | 29/64″ | 29/64″ |
What size is a 30 drill bit?
We start by displaying drill bit Number 30 in decimal inches as follows: #30 drill bit = 0.1285 inches. 0.1285 decimal as a fraction is 257/2000. However, standard fractional drill bits come in intervals of 1/64 inches.
How do you know what size drill bit to use?
How to Choose Drill Bits by Size
- Use a bit 1/64” smaller than the target hole size for softwoods.
- Use a bit exactly the same size as the hole when working on other materials.
- If you’re not sure which to select, choose a drill bit 1/64” larger than the hole you wish to create.
What is the fractional equivalent of a number 25 drill bit?
Decimal Equivalents from # 80 to 1″, .0135″ to 1.000″
| Drill | Decimal | Decimal |
|---|---|---|
| 9/64 | .1406″ | .2720″ |
| 27 | .1440″ | .2770″ |
| 26 | .1470″ | .2810″ |
| 25 | .1495″ | .2812″ |
What is a 10 24 Tap?
US Tap and Drill Bit Size Table
| Tap | Fractional Drill Bit | Number Drill Bit |
|---|---|---|
| #6-32 | 7/64″ | 35 |
| #8-32 | – | 29 |
| #10-24 | 5/32″ | 25 |
| #10-32 | 5/32″ | 21 |
What is the decimal equivalent of a number 7 drill?
201/1000
A number 7 drill bit is 0.2010 inches. As a fraction, the 0.2010 decimal is 201/1000.
What do the numbers mean on my drill?
You’ll see a list of numbers from 1 to 10 or 20. These are used to set the clutch to deliver a torque range. The higher the number on the collar, the higher the torque and the larger the fastener that can be driven. To adjust your clutch, align the arrow to a lower setting and start driving a screw.
What size is a number 44 drill bit?
Downloadable versions:
| Drill size | Diameter (in) | Diameter (mm) |
|---|---|---|
| #46 | 0.0810 | 2.0574 |
| #45 | 0.0820 | 2.0828 |
| 2.1 mm | 0.0827 | 2.1000 |
| #44 | 0.0860 | 2.1844 |