What is AWID windshield?
Product Description. The AWID WS-UHF-0-0 is a long-range RFID windshield sticker tag. These vehicle tags are compatible with AWID long range reader models LR-2000, LR-2200 and LR-3000. The WS-UHF-0-0 is tamper resistant and designed to stop working if removed from the vehicle windshield.
What is a windshield tag?
The UHF Windshield Tag is a vehicle identification tag. It offers cost effective long-range identification for parking applications. Based on passive UHF technology (± 900 MHz), the UHF Windshield Tag is identified up to 10 meters (33 ft) with uPASS Target or 5 meters (16 ft) with uPASS Reach.
How does tag master work?
The non-transferable WindShield Tag is mounted on the inside of the vehicle windshield using the adhesive, and the tag has a barcode at the front to allow automated processing and easy issuing to users. The tags are delivered in continuous running number series.
What is TAG master used for?
TagMaster provides solutions for counting, analyzing and classifying vehicles using inductive loops. Digital signal processing is applied to the captured signal to get the highest possible accuracy. Another technology used for Journey Time Measurements is Bluetooth sniffers.
How do you use a TagMaster?
Place the Tag on the windshield, on the same side / as close to the reader as possible. If the reader is placed in a high position, place the Tag in the upper part of the windshield. Do not place the Tag on the side windows. The Tag must have minimum 1 Inch or 3cm distance from the windshield edges.
What does a TagMaster do?
TagMaster develops and delivers smart solutions aimed at improving the operational efficiency of sustainable transportation networks in the Traffic Solutions area.
Where does RFID go on windshield?
When installing make sure the RFID is facing the interior of your car. Putting it on the exterior of your windshield may cause it to get damaged especially if its in the way of your wiper blades. Don’t worry as despite the tag being on the inside of your vehicle the RFID reader will still be able to pick it up.
Where do I stick my Easytrip RFID sticker?
There are two places you can install your Easytrip RFID sticker. The first one is on your car’s right headlamps, while the other place is on your car’s right portion of its windshield from the inside.
How do you get a RFID sticker off a windshield?
Apply nail polish remover or rubbing alcohol to a cotton ball or rag, and then rub it on the decal (especially around the edges). With the straight edge of a razor blade or utility knife blade, lift one corner of the decal. Slowly peel the decal off the window.
How do you get a sticker off your windshield without damage?
- Window cleaner. Spray window cleaner on the sticker, use a razor blade to chip away at it, and pull the sticker up slowly.
- Rubbing alcohol. Apply rubbing alcohol to the sticker and wait a few minutes before peeling away from the glass.
- Goo Gone. Goo Gone’s main purpose is removing stickers and sticker residue.
- Ice.
- WD-40.