What happens when you replace the battery on a Mercedes?

What happens when you replace the battery on a Mercedes?

Upon replacing, the dash warning lights for “BAS ESP and ABS” are still lit and will not go out. Is there something that I can do to reset, or do I have to take to dealer. Also, left window now will not go back up + I cannot pop hard top. Please help. I don’t want to get ripped off by the dealer over replacing a battery.

How to disconnect a car battery to reset the computer?

Different cars will have different procedures, but with most, just driving the car will do the trick. If you use the baking soda mixture instead of cleaner, mix 1 tablespoon of baking soda into 1 cup of water. Thoroughly rinse the battery with clean water to remove all of the solution.

How do you change battery on Mercedes E55?

I had exactly the same thing happen when the tech replaced the battery on my E55. After replacing the battery, he put the key in the ingnition and turned the stearing wheel all the way to the left and then all the way to the right, did this three times.

What can I use to reset the ECM on my car?

The ECM has now learned where the accelerator pedal should be when fully released. Different cars will have different procedures, but with most, just driving the car will do the trick. If you use the baking soda mixture instead of cleaner, mix 1 tablespoon of baking soda into 1 cup of water.

Upon replacing, the dash warning lights for “BAS ESP and ABS” are still lit and will not go out. Is there something that I can do to reset, or do I have to take to dealer. Also, left window now will not go back up + I cannot pop hard top. Please help. I don’t want to get ripped off by the dealer over replacing a battery.

I had exactly the same thing happen when the tech replaced the battery on my E55. After replacing the battery, he put the key in the ingnition and turned the stearing wheel all the way to the left and then all the way to the right, did this three times.

How to reset the steering sensor after replacing a battery?

After replacing the battery, he put the key in the ingnition and turned the stearing wheel all the way to the left and then all the way to the right, did this three times. That did the steering sensor reset, then he rolled all four windows down and held the switch in down position for few seconds and did the same thing with windows rolled up.

How to resynchronize the adjustment feature in a Mercedes Benz?

To resynchronize the adjustment feature, turn electronic key in steering lock to position 2, move the seat completely forward and the head restraint fully down, and hold respective buttons for approximately two seconds. closed by the Express feature.

How does the auxiliary battery work on a Mercedes Benz?

The auxiliary battery supplies power for a limited time if system charging or battery voltage drops. The battery control module monitors system voltage. If voltage reaches a low point, the auxiliary battery relay closes to connect the battery to the vehicle fuse blocks.

How to replace battery in Mercedes Benz W211?

Cover the cable end so it does not accidentally come in contact with the battery terminal. Using a 10mm socket, remove the battery hold down (red arrow) nut. Then, flip the hold down up toward the firewall (inset). Lift the battery up and remove it from the well. Be careful and make sure you have a good grip.

How to reset a Mercedes Benz after a flat battery?

How to Reset a Mercedes-Benz After a Flat Battery. 1 Step 1. Insert the reset tool into the Mercedes’ data-link connector, which is near the hood-release latch. Turn on the ignition. 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5.