What does E61 mean on a washing machine?
Motor tachometer generator fail
Logik Washing Machine Error 61: “E61” Error Code Definition: Motor tachometer generator fail. Error on the washers main drive motor circuit in connection with overheat protector in the motor.
How do you fix an E60 on a Zanussi washing machine?
2 Answers. The error code E60 on a zanussi washing machine is a motor issue. First try resetting the machine by unplugging for five minutes, Next check to see if the wires are fully plugged into the machine motor.
What does E60 mean on washing machine?
Washing machine displays error message E60 (or any code beginning with E61, E62 etc.). It generally refers to a heating problem with the machine.
How do you reset a Zanussi washing machine?
Resetting guide: Press the two buttons at the top (soak and pre-wash). At the same time, turn the cycle selector counter-clockwise to the delicate spin cycle. Then release the two buttons and continue turning the selector counter-clockwise all the way round to off (almost one full turn). Try to wash normally.
What is E61 code?
Error code E61 means Heater Relay failure. Heater relay stuck open or closed, Wiring defective. Heater relay is on the board.
What does Error 21 mean on a washing machine?
Drain flow error
E21 – Drain flow error. This error will be displayed when the unit senses that the drain process is taking too long. This error may be caused by a blockage occurring in the coin trap or in the drain line. The Coin Trap can collect small objects from the wash cycle.
What does E60 mean on a Zanussi tumble dryer?
heating problem
Tumble dryer displays error message E60 and does not heat up. It indicates a heating problem.
How do you open the door on a Zanussi washing machine?
Pause the cycle and wait for 2-3 minutes. If the door does not unlock then the cycle should be cancelled and a spin/drain cycle selected. Once the appliance has drained the water in the drum and finished the cycle, the door will open with 2-3 minutes.
What does E2 mean on washing machine?
E2 – Draining Alarm An E2 Error code indicates that the washer is still draining after 8 minutes.
How do I find my Zanussi error code?
Error codes on Zanussi washing machines will be displayed in two different ways. If your machine has an LCD display you’ll see the letter E (E is for Error) followed by two numbers. If your machine has no LCD display however, combinations of LEDs on your machine will flash.
What does E90 mean on a Zanussi washing machine?
Clean the filter (located bottom right of machine). It is prudent to place a large pan under the opening to catch any spillage. If it does not solve the problem then an E90 error message indicates a problem between the control panel and the main circuit board or that the circuit board got wet.
Can I stack my Frigidaire washer and dryer?
From the Manufacturer. The Frigidaire STACKIT4X Laundry Stacking Kit is compatible with Frigidaire Affinity Washers and Dryers. To utilize your limited laundry space efficiently, you can use the stacking kit to fasten and organize your units with the dryer on top of the washer.
What is the error code on a Zanussi washing machine?
E51, E52, E53 or E54. E5* Zanussi washing machine error codes relate to faults with the motor in your washing machine. You’ll need to check the motor itself, motor brushes and wiring and connections to the motor to get to the bottom of a motor fault.
What does E33 mean on a Zanussi washing machine?
· E33, E36, E37 and E39 all indicate an error in the pressure switch circuit so check the switch itself and the wiring and connections to it. If the error code on your machine begins E4* it indicates a problem with the door lock.
What does code 61 mean on a washing machine?
This error is similar to code 61 but it means the washing machine is overheating. There are again numerous possible causes of this problem and while it may correct its self, it’s best to call in a professional to examine the appliance.
What does fault code E6 on washing machine mean?
Check the connections between the motor and the control board and if they’re okay, suspect the board. E6* or E7* fault codes relate to a problem with the heating system in your Zanussi washing machine. You’ll need to check the heating element, the temperature sensor and the connections and wiring to both.