What could cause a P0446 Code?

What could cause a P0446 Code?

Code P0446 indicates that there is an improper voltage drop in the EVAP Vent Valve circuit, which can be caused by either too little or too much electrical resistance. This improper electrical condition will cause the vent valve to malfunction.

What does Code po446 mean?

Evaporative Emission Control System Vent Control Circuit
P0446: Evaporative Emission Control System Vent Control Circuit. This generic OBD-II code indicates that the evaporative vent valve in the emission control system is malfunctioning. When this occurs, the EVAP system may not be capable of pressurizing and maintaining a vacuum seal.

What is EVAP emission control system vent circuit malf?

The evaporative emission control (EVAP) system prevents fuel vapors from escaping into the atmosphere. When P0446 is triggered, the ECM has detected a short in the circuitry to activate the vent control valve, or the EVAP system failed to maintain the proper pressure during the active EVAP leak test.

Where is the p0446 code on a Toyota Camry?

The P0446 codes triggered when an improper voltage signal is sent to Engine Control Module (ECM) through EVAP canister vent control valve. The Evaporative System ( EVAP) canister vent control valve is located on the EVAP canister and is used to seal the canister vent.

What is the trouble code on a Toyota Camry?

This trouble code references a number that is given to you when you plug your Camry into a OBDII scanner. P0446 Indicates that there is a fault in the evaporative emission control system. It often appears with other codes, such as P0420, P0441, or P0440.

What does p0446 mean on a fuel pump?

Scan your vehicle to verify P0446 is the only code present. If other codes are present regarding fuel pressure or the fuel system, repair and diagnose those first. If it is paired with P0441, P0440, and/or P0446 there is most likely a solenoid failure, leaking charcoal canister, or a more complex EVAP leak.

When to repair a check engine light p0446?

The driver will likely not notice any symptoms associated with P0446 other than the check engine light being on. However, as with all check engine light diagnostic trouble codes, you should repair it as soon as possible to return the vehicle to normal operation. Scan your vehicle to verify P0446 is the only code present.