What can cause the temperature light to come on?
When the coolant temperature warning light goes on, the engine is seriously overheated, which can be caused by overheating, lack of cooling water or a cooling system that is having trouble. At this point, you need to park your car in a safe area with shade (if it’s summer) to open the bonnet.
Why would my coolant temperature light be high?
Coolant Temperature Warning This is the most urgent warning light because it means that your coolant and thus your engine is overheating. Stop in a safe area and let the engine cool down. Check for leaks in the coolant system, then check the coolant level, fans, and radiator cap.
What temperature does coolant light come on?
If the warning light comes on during driving (or the temperature gauge goes into the red danger zone), then the coolant temperature is about 250°F to 258°F (120°C to 126°C), which is still below the boiling point of the coolant (assuming a properly operating pressure cap and system).
Is it safe to drive with coolant light on?
So, can you drive safely with your Coolant Pressure Light on? The short answer is that it probably won’t get you killed, but it could mean death to your car engine. An overheated engine can cause incredible damage – failed head gaskets, damaged pistons and valve stems, and distortion or cracks in the cylinder heads.
How do I lower the coolant temperature?
How to prevent your car from overheating
- Park your car in the shade.
- Use car window shades.
- Tint your windows.
- Leave car windows open slightly.
- Turn the floor air vents on.
- Use the fresh air setting instead of recirculation on your A/C.
- Keep your eye on the car temperature gauge.
- Turn on the heat to cool the engine.
What should you do if coolant temperature light comes on?
If you are driving when this warning light goes on, pull over safely as soon as possible and shut off the engine to let everything cool down. Let the engine cool down for at least 30 minutes before attempting to remove the radiator cap and remember to use a thick rag to protect your hand when you do so.
What do you do when the coolant temperature light comes on?
Why does my Subaru at oil temp light come on?
The Subaru at oil temperature light coming on when driving or while the car engine is running simply means or indicates that the fluid temperature of the automatic transmission is too hot or higher than normal.
How to get a temp light on a Subaru Forester?
Turn the ignition switch OFF (Went onto side of road – put it in park, turned off car, removed key) 3. Turn the ignition switch ON (Waited 5 seconds, then put key in and turned on ignition so dash lights up) 4. Start the engine (started car) 5. Drive the vehicle at speeds greater than 12 MPH (put car into D and drove for about 30 seconds at 40 mph)
When does the blue light on the forester go away?
The Forester does not have the temperature gauge, but rather have this indicator, i.e. the blue light disappears when the temp reaches normal. …the blue light disappears when the temp reaches normal.
What are the warning lights on a Subaru?
The following are warning lights and indicators found in vehicles built by Subaru. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are nearly 50 of them so be patient!