Is tire rotation and balance the same as alignment?
Both contribute to a smoother ride, but tire balancing and alignment are different services. A tire balance corrects the weight imbalance on your tire and wheel assemblies, while an alignment corrects the angles of the tires so that they come into contact with the road in just the right way.
When do you need to align your Lexus tires?
This article applies to the Lexus IS, RX, GS, LS, and ES (2005-2013). You need alignment if your vehicle is pulling to the left or right, or if your tire tread wear is uneven. People don’t think it’s possible to align their tires at home without the fancy machine shops use.
How many turns should I use to adjust my alignment?
Once finished, repeat the process on the other side and you will be finished! Always use small increments of turns when adjusting your alignment. Even an 1/8 turn can make a large difference between correct setting and an incorrect setting. Take your time and double check your string-to-wheel hub gap repeatedly.
What’s the best way to align your tires?
Always use small increments of turns when adjusting your alignment. Even an 1/8 turn can make a large difference between correct setting and an incorrect setting. Take your time and double check your string-to-wheel hub gap repeatedly. Good luck and use the money you’ve saved to enjoy your fresh alignment!
How do you align the tires on a Lexus?
Take your contractor’s string, cut to the length of the car and loop each end on each jack stand. Pull your jacks apart until the string is taught. Now raise each jack stand to the center hub of your wheels. Make sure your string is one inch from the center of each wheel, at the front and rear. Figure 1. Attach string to jack stands.
When do I need to change my Lexus tires?
Before you start this process, measure the tire tread to make sure they are more than 2/32″ in per Lexus specs. If they are any less than that, you need to change your tires, then you can set your alignment. It’s also important to note that alignment MUST be done on a known level surface.
Once finished, repeat the process on the other side and you will be finished! Always use small increments of turns when adjusting your alignment. Even an 1/8 turn can make a large difference between correct setting and an incorrect setting. Take your time and double check your string-to-wheel hub gap repeatedly.
Always use small increments of turns when adjusting your alignment. Even an 1/8 turn can make a large difference between correct setting and an incorrect setting. Take your time and double check your string-to-wheel hub gap repeatedly. Good luck and use the money you’ve saved to enjoy your fresh alignment!