Is it hard to replace snowmobile track?
Anyone with a basic understanding of their snowmobile, has an open work space, some tools and a little patience can swap out their own snowmobile track. In order to get your old track off, you will need to remove your rear suspension, some parts under the hood and the drive shaft.
How do you remove the track from a Yamaha snowmobile?
How to Remove the Track on a Yamaha Snowmobile
- Place a jack stand under the rear bumper.
- Remove the drain plug from the chain case to drain the oil into a plastic bucket.
- Remove the screws holding the gears on and remove the gears.
When to replace the track on a Yamaha snowmobile?
If your track has peeling edges or the reinforcement rods are fractured, then it’s probably time to replace your Yamaha snowmobile track. Also, if your track is stretched or the exterior lugs are worn, you may wish to remove the track.
How do you remove the track on a snowmobile?
Wiggle the drive shaft beneath the snowmobile to remove it through the chain case. Tap the drive shaft gently off to the side and remove it. Remove the track by pulling it out from the rear of the snowmobile. Jason Alexander began his professional writing career in 2003.
How to tighten the track on a 1998 Yamaha SRX?
Click to expand… Not really! Just a different style is all. If its the same as my old 96 v-max, there hiding threw the holes in the track in the back. Click to expand… THX, that makes sense, I have never seen that before but it is the only thing left. Is there an easy way to adjust both sides evenly? Also, how do you know how tight to make it?
How do you remove the drive shaft from a snowmobile?
Wiggle the drive shaft beneath the snowmobile to remove it through the chain case. Tap the drive shaft gently off to the side and remove it. Remove the track by pulling it out from the rear of the snowmobile.
How to find the correct track for a Yamaha snowmobile?
This will provide you with key information for selecting the correct replacement track for your Yamaha snowmobile. The guide lists Yamaha snowmobile models in alphabetical order. So your first option is to search by simply scrolling down looking at the left hand column for your model of sled and then checking the year column for the correct year.
Wiggle the drive shaft beneath the snowmobile to remove it through the chain case. Tap the drive shaft gently off to the side and remove it. Remove the track by pulling it out from the rear of the snowmobile. Jason Alexander began his professional writing career in 2003.
Wiggle the drive shaft beneath the snowmobile to remove it through the chain case. Tap the drive shaft gently off to the side and remove it. Remove the track by pulling it out from the rear of the snowmobile.
How can I search for a Yamaha sled?
The search feature only needs one key word concerning the model of Yamaha sled you are searching for. For example, if you have a RX-1 model, type in RX-1 and the table will show you all RX-1 models. This will narrow down the number of models on the chart.