How to replace alternator in VW Jetta TDI?
In this video Corey from IDParts.com replaces the alternator in a Mk4 Jetta TDI with the ALH engine. Same procedure for Golf and New Beetle models, though New Beetle models may have less clearance and require more disassembly. http://www.idparts.com/alternator-120… http://www.idparts.com/alternator-120… Loading…
How long does it take to replace an alternator on a VW Beetle?
Some helpful tips for replacing a very intimidating alternator on a 2000 TDI Beetle. You will swear it will NOT come out, it is very tight, take your time. It took me 4-5 hours to do this job with a lift. Removing the bumper and radiator takes an additional 4-5 hours.The Beetle with the 2.0 gas or 1.8T gas engine is MUCH easier.
Is there a YouTube error with my VW Beetle?
An error occurred. Please try again later. (Playback ID: mnvF9gyUB8pGsXFi) Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.
How long does it take to lift a TDI Beetle?
It took me 4-5 hours to do this job with a lift. Removing the bumper and radiator takes an additional 4-5 hours.The Beetle with the 2.0 gas or 1.8T gas engine is MUCH easier. Just the TDI Beetle is ultra tight. Loading…
How do you remove an alternator from a lawn mower?
You will need to suspend it in some way, with bungee cords or ties, to keep from putting stress on the hoses. The same with the alternator- you need to loosen the bolts, smack them to reset the slide nuts. Remove the electrical connector and the power cable (13mm nut) and then remove the alternator outward toward the fenderwell.
How do you remove a serpentine belt alternator?
Refer to the Serpentine Belt Tensioner removal video. Before removing the alternator, you need to remove the serpentine belt tensioner and belt. Refer to the Serpentine Belt Tensioner removal video. Remove the two bolts from the alternator. Now that the bolts are out, pull the alternator off the bracket. Walking it back and forth to aid in removal.
How do you remove serpentine belt tensioner from VW Jetta?
Refer to the Serpentine Belt Tensioner removal video. Remove the two bolts from the alternator. Now that the bolts are out, pull the alternator off the bracket. Walking it back and forth to aid in removal. Next disconnect the wire connectors. Take the main battery cable off and the connector.
What should the volts be on a Volkswagen Beetle?
With your Beetle turned off, you’ll connect the negative side of the meter to the negative battery post or wire. You’ll then touch the positive side of the voltmeter to the positive battery wire. With the engine off, you should get a reading somewhere between 12.0 volts and 12.6 volts.
When to replace the alternator on a Kia Sorento?
If you got 14.2 or more volts, the alternator is charging fine. If it’s still showing in the 12’s, it’s time to replace the alternator. If it’s producing a voltage level in the 13’s, go ahead and take it into a parts store and have it tested.
What happens if you break the serpentine belt on a TDI?
The TDI’s serpentine belt is one of the car’s most crucial components. A break in the belt will cause a loss of mechanical energy to the alternator, the generator which produces the electricity for the rest of the car and charges the battery, the power steering and the A/C.
How do you replace a serpentine belt on a VW?
Locate and remove the return hose marked blue. Use pliers to relieve pressure off the tension spring clamp in order to remove the hose. Collect any fuel that may leak out with a clean cloth. Insert and screw the M8x45 bolt into the threaded hole of the tensioner. Screw it in until the serpentine belt no longer has any tension holding it in place.