How to remove an alternator from a Mercedes Benz?
Position the alternator down in the area of the mounting bracket, attach the small exciter wire, larger alternator output wire to the alternator and tighten the fasteners. Do not over-tighten. Position the alternator in the bracket lining up the mounting bolt holes, installing the fasteners and tightening them.
How to remove alternator from Mercedes R129 SL500?
Position the alternator in the bracket lining up the mounting bolt holes, installing the fasteners and tightening them. Fit the drive belt and set the tension on the belt.
Do you need to remove serpentine belt to change alternator?
As you loosen the bolts, the alternator will slide in the bracket under the tension of the belt. You may not need to remove the serpentine or accessory belt if it’s not damaged.
How do you install a new alternator in a car?
Installing the New Alternator Slide the new alternator into place. You might have to wiggle the alternator around to squeeze it back into place in a crowded engine bay. Insert the mounting bolts. Slide the mounting bolts through the alternator and into the mounting bracket. Run the belt over the new alternator pulley.
How do you replace an alternator on a Mercedes Benz?
Release tension on the alternator belt. Turn the center tension pulley clockwise with a socket wrench. This will create slack in the belt. Slide the belt off the alternator. You will need to remove the belt from all of the other components on the system as well. Remove the electrical connector on the back of the alternator.
Position the alternator in the bracket lining up the mounting bolt holes, installing the fasteners and tightening them. Fit the drive belt and set the tension on the belt.
How to replace alternator on Mercedes Benz E C CLK SLK s?
Tighten the nut for the electrical cable ( positive +) between 15-18Nm. Plug the electrical cable on the back of alternator and make sure it clicks when you push it in. That way you know it is locked in place. Reinstall the serpentine belt, the engine cover and the reconnect the battery. 2 Bolts that hold the alternator in place. Max 45 Nm.
How can I get an alternator out of my car?
With the belt pulled off of the alternator pulley and the wires disconnected, the alternator should come out freely. You may need to wiggle the alternator around some things in order to remove it. Keep track of how you worm the alternator out of the engine bay to help squeeze the new one in. Compare the new alternator to the old one.