How often does a Honda Pilot need an oil change?

every 7,500 miles
The recommended oil change interval for the Honda Pilot is every 7,500 miles or every year, whichever comes first. Whether you perform this basic service yourself or take your Pilot to a professional service center, it’s always important to make sure your car gets the right kind of oil for optimum performance.

What kind of oil does a 2010 Honda Pilot take?

SAE 5W-20
Motor oil — SAE 5W-20. Capacity (with filter) is 4.5 quarts (4.3 liters).

How do you reset the oil life on a 2010 Honda Pilot?

Oil Change Light Reset Honda Pilot 2006 2007 2008 2009 2010 2011

Turn the ignition to the “RUN” position.
Press the “SELECT/RESET” knob until the engine life indicator is displayed.
Press the “SELECT/RESET” knob for more than 10 seconds, the indicator and the maintenance code(s) will blink.

How much oil does a 2010 Honda Pilot take?

4.5 quarts
Capacity: 4.5 quarts (with filter)After refill check oil level. 4.2 quarts.

How do I reset my oil life on my Honda Pilot?

Select the Reset mode by pressing the Info button on the steering wheel, and then press the Select/Reset button to reset the Engine Oil Life Display. Any maintenance item codes and lights displayed will disappear, and the Engine Oil Life will reset to 100%.

How do you reset the oil life on a Honda Pilot 2020?

Go to “Home” > “Settings” > “Vehicle” > “Maintenance Information” > “Oil Life“. Press and hold the “Enter” button for more than 10 seconds. The vehicle will enter reset mode. Use the arrow buttons to toggle to “Oil Life“, then press “Enter“.

When to reset the oil change light on a Honda Pilot?

The Oil Change Light Reset Honda Pilot 2006 2007 2008 2009 2010 2011 will need to be performed after every oil change. If it is not reset the system will be unable to properly track when your next oil change is due. Below is the Oil Change Light Reset procedure for the Honda Pilot 2006 2007 2008 2009 2010 2011 .

How to reset Honda Element maintenance light after oil change?

If the engine oil life is not displayed press the SEL/RESET knob in the instrument panel repeatedly until it is Press and hold the SEL/RESET knob in the instrument panel for about 10 seconds or until the maintenance item code (s) begin to blink

How do you reset the oil life on a Honda Accord?

Press the “SELECT/RESET” knob until the engine life indicator is displayed. Press the “SELECT/RESET” knob for more than 10 seconds, the indicator and the maintenance code (s) will blink. Press the “SELECT/ RESET” knob for 5 more seconds, the maintenance code (s) will disappear and oil life will be reset to 100.

How to reset Honda CRZ maintenance light after oil change?

Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds The remaining engine oil life reset mode will be shown on the multi-information display Select Reset by pressing the INFO (up and down arrow icons) button then press the SEL/RESET button to reset the engine oil life display

Where can I buy a new oil filter for a Honda Pilot?

You can buy this wrench from a dealer. When installing the new oil filter, follow the instructions supplied with the oil filter. Reinstall the engine oil fill cap. Start the engine. The low oil pressure indicator should go off within five seconds. If it does not, turn off the engine, and check your work.

How is the oil life calculated on a Honda Pilot?

Based on the engine operating conditions and accumulated engine revolutions, the onboard computer in your vehicle calculates the remaining engine oil life and displays it as a percentage.

Navigation