How much oil does a Suzuki XL7 hold?

How much oil does a Suzuki XL7 hold?

Engine Oil

Viscosity: 5W-30 (All TEMPS) SAE 5W-30 is preferred.
Capacity: 5.5 quarts (with filter)After refill check oil level.
Torque: 18 ft/lbs (Oil Drain Plug)

How many quarts of oil does a 2002 Suzuki XL7 take?

2002 Suzuki XL-7 – Specs

Capacities Suzuki XL-7
Engine Oil 5.2 U.S. qts.
Fuel Tank 16.9 U.S. gallons
Engine Coolant 8.2 U.S. L
Automatic Transmission Fluid 7.1 U.S. L

What kind of oil does my 2002 Suzuki XL7 take?

Engine Oil

Viscosity: 10W-30 (Above -18) 5W-30 (All TEMPS) SAE 5W-30 is preferred.
Capacity: 5.8 quarts (with filter)After refill check oil level.
Torque: 36.5 ft/lbs (Oil Drain Plug)

What type of oil does a 2002 Suzuki xl7 take?

SAE 5W-30
Engine Oil SAE 5W-30 is preferred. Capacity: 5.8 quarts (with filter)After refill check oil level.

How do you reset the oil light on a Suzuki xl7?

The oil life system can also be reset as follows:

  1. Turn the ignition to the ACC position without starting the engine.
  2. Fully press the gas pedal to the floor 3 times within five seconds.
  3. Turn the ignition off and start the engine to verify the indicator has been reset.

Can a Suzuki dealer change the transmission oil?

After checking or adding oil, be sure to insert the dipstick securely. Since special procedures, materials and tools are required to change the automatic transmission oil, it is recommended that you trust this job to your authorized SUZUKI dealer.

What kind of transmission fluid does a Suzuki use?

Use an automatic transmission fluid SUZUKI ATF 3317 or Mobil ATF 3309. Driving with too much or too little fluid can damage the transmission. You must check the fluid level with the automatic transmission fluid at normal operating temperature.

What kind of oil does Suzuki Grand Vitara use?

1,5 L. Change interval. Check 15000 km/ 12 months, Change 30000 km/ 24 months. Oil type. 80W-90, 75W-90, 75W-85. Engine. Grand Vitara 2.7 V6 JB627. Unit.

How do you check the fluid level in a Suzuki?

3) Park your vehicle on level ground. 4) Apply the parking brake and then start the engine in ā€œPā€ (Park). Let it idle for two minutes and keep it running during the fluid level check. 5) With your foot on the brake pedal, move the gearshift lever through each gear, pausing for about three seconds in each range.