How much does it cost to replace PCV valve on Saab 9-5?
The average cost for a Saab 9-5 PCV Valve Replacement is between $60 -$68. Learn More I have already changed the crankcase unit last year. Now I see oil leaks from the timing cover and/ rear main seal.
What causes oil leak in Saab 9-5 engine?
Oil leaks from the timing cover, valve cover, and/or rear main seal may be due to excessive crankcase pressure. An updated PCV (Positive Crankcase Ventilation) kit was released to fix this concern. Saab 9-5 Vehicles With This Problem.
How do you replace a crankcase in a Saab 9-5?
1. Disconnect the battery’s negative cable. 2. Remove the upper engine cover. 3. Fit a new oil filler pipe. 4. Remove the hose from the pipe connection on the turbo’s intake manifold. 5. Remove the hoses from the nipple in the camshaft cover. Check the condition of the hoses, replace if necessary. 6.
Where is the PVC box on a Saab 05?
The 05 has a different pvc system. It has a hole in the back of the block that goes directly into the pvc box behind the engine.
Where is the check valve on a Saab 9-5?
12. Check the function of the check valve on the small circuit with 30 14 883 Pressure/Vacuum pump, replace if necessary. The arrow must point toward the throttle body. Arrow’s direction on the check valve. 13. Connect the new hose kit (with T-connection) between the nipple on the oil filler pipe and the connection on the turbo’s intake manifold.
How to lower the crankcase in a Saab?
Fit the new oil trap, the lower hose to the oil trap (replace hose if necessary) and the stay for the intake manifold. If the positive cable was removed, connect it to the generator. 11. Lower the car.
The 05 has a different pvc system. It has a hole in the back of the block that goes directly into the pvc box behind the engine.
Where is the coolant hose on a Saab Turbo?
Connect the new hose kit (with T-connection) between the nipple on the oil filler pipe and the connection on the turbo’s intake manifold. 14. Fit the insulation under the throttle body’s coolant hoses so that the insulation’s short sides point upward.