How many full charge cycles do you expect to receive from a Shimano battery until you have only 60% battery capacity?
1000 charge cycles
Shimano guarantees a remaining battery capacity of 60% after 1000 charge cycles. Your dealer can determine the remaining battery capacity for you.
What happens when you disconnect the battery on a Harley?
Since disconnecting the battery on my harley it wont start. Bike still has power all lights etc since disconnecting the battery on my harley it wont start. Hey there!
Why does my bike not turn on when I press the power button?
A low charge or a loose battery connection can cause your bike to not turn on when you press MODE or the power button. Follow the steps below to check that the battery is charged and correctly installed. Check the battery charge level. With the battery in place on the bike, use the key to turn on the battery.
What should I do if my bike wont start?
Charge the battery or replace it if it’s dead. Am easy way to test your battery is by checking the voltage-drop with a multimeter as you try starting the bike. If your fully charged battery drops below 11,5 volts under load (while you crank the starter), it needs to be replaced.
What happens when a motorcycle battery is not used?
How a motorcycle battery dies: If a motorcycle battery is not used and just sits, it will lose it’s capacity to power your motorcycle. There is also a phenomenon called parasitic drain.
A low charge or a loose battery connection can cause your bike to not turn on when you press MODE or the power button. Follow the steps below to check that the battery is charged and correctly installed. Check the battery charge level. With the battery in place on the bike, use the key to turn on the battery.
Since disconnecting the battery on my harley it wont start. Bike still has power all lights etc since disconnecting the battery on my harley it wont start. Hey there!
Why does my Harley Davidson bike not start?
When I turn on the bike and put it in the run position, the fuel pump kicks on, but when I push the start switch the bike doesn’t even try to turn over. The battery is fully charged and the fuel pump turns on when I push the switch, but nothing else happens.
What should I do if my motorcycle battery wont start?
If you don’t see these symptoms or are otherwise unsure what to look for, the first step is ensuring that the battery is operational and providing the maximum voltage. To confirm your battery is still good, you should visually inspect it, check the voltage, and load test the battery. A visual battery inspection should involve: