How does fuel injection work in a Honda?
The impeller draws fuel in and through the pump body to the discharge port. A check valve in the pump discharge port maintains residual pressure in the delivery system when the engine is turned off and the pump is not operating. Maintaining residual fuel pressure at the injectors aids in quick engine starting.
What’s the power of a Honda Civic engine?
Power ranges from 66 PS (49 kW) in the Logo to 130 PS (96 kW) in the Civic Si. D-series production commenced 1984 and ended 2005. D-series engine technology culminated with production of the D15B 3-stage VTEC (D15Z7) which was available in markets outside of the United States.
When did the first Honda Civic come out?
The Honda Civic first entered the US car market in 1972 as a 1973 model year. Since then, the Civic has built a name for itself for being reliable, affordable, and fuel-efficient. While it started as a subcompact, it has since grown to become a well-respected member of the compact segment.
What is the wheelbase of a Honda Civic?
The suspension had a radical re-configuration with double wishbone suspension in the front and an independent suspension in the rear, wheelbase was increased to 98.4 inches (250 cm), and the body was redesigned with a lower hood line and more glass, giving less drag.
What should fuel pressure be on Honda GL1800?
This is measured in inches or millimeters of Mercury (Hg). A normal motorcycle idle vacuum pressure is about one inch of Hg., or 4.9 psi. Fuel pressure is typically in the range of 32 – 50 psi. The GL1800, for example, uses a fuel pressure of 50 psi.
How does the fuel off position work on a Honda engine?
The new integrated Fuel-Off position on the engine control allows the user to stop the flow of fuel to the engine when pressure washing is complete. How does it work – With the engine running and the switch placed in the Fuel-Off position, the fuel flow to the carburetor is stopped.
How to remove pressure sensor from fuel tank?
Disconnect the fuel vapor tube assembly-to-Evaporative Emission (EVAP) canister quick connect coupling. For additional information, refer to Section 310-00. Disconnect the fuel vapor tube assembly-to-fuel tank quick connect coupling. For additional information, refer to Section 310-00.
What to do if your fuel pressure regulator is bad?
If it is a faulty fuel pressure regulator, then the mechanic can recommend having it replaced. He can also recommend other fixes if the cause is due to other reasons. An engine that will not start can be due to a host of problems. It can be because of a dead battery.
How does the fuel pump work on a golf cart?
Inside the pump, there are several diaphragms which use the pulsing action created by the vacuum of the crankcase pressure to draw fuel from the storage tank and push it onward to the carburetor of the golf cart. The fuel nozzles as well as vacuum line connections are shown below.
Disconnect the fuel vapor tube assembly-to-Evaporative Emission (EVAP) canister quick connect coupling. For additional information, refer to Section 310-00. Disconnect the fuel vapor tube assembly-to-fuel tank quick connect coupling. For additional information, refer to Section 310-00.
Can a pin hole in a vacuum line affect fuel pressure?
If the vacuum line has damage or a pin hole, you will not see any outward signs of an issue. But, this can greatly affect your fuel pressure as the slight hole causes the vacuum to lose power and suck in an excess of air.