How do you reset the oil life on a 2011 Hyundai Sonata?
1 Answer
- Start your engine.
- Press and hold the OK button for five seconds.
- Release it and then press it again once and hold it for a second or two, and the oil light will go away.
How do you reset the oil light on a 2012 Hyundai Sonata?
Hear this out loudPauseEach time Your 2012 Hyundai Sonata is serviced, the “Service Interval” settings should be reset. Press and hold the “OK” button on the right-hand side of the steering for 5 seconds, and the Service Interval will be reset to its default settings.
How to reset service light indicator on Hyundai Sonata?
Start the engine. If a service is due the display will show “Service required”. To reset this message, locate and press the OK button located at the top right of the steering wheel for more than 1 second. The service interval will be reset to the default setting.
How to reset the oil change light on 2010 Hyundai Santa Fe?
Go under the hood and add oil. Turn on the engine and check the oil pressure gauge to make sure it rises. Let your Santa Fe run for a minute. Lower your Hyundai Santa Fe and turn off the engine. Take an oil reading on the dipstick. If the oil level isn’t at full, add a bit more oil. Thanks Kinldy rate the answer Smith Posted on
When to reset the oil reset service light?
For Hyundai Sonata years 2013, 2014, 2015 models the oil reset maintenance light system can also be reset as follows: Start the engine. If a service is due the display will show “Service required”.
How can I reset the maintenance light on my car?
For reset maintenance light and that can be made manually by use button on car dashboard. Start the engine. If a service is due the display will show “Service required”. To reset this message, locate and press the OK button located at the top right of the steering wheel for more than 1 second.
How to reset Hyundai Sonata service required light?
Steps by step tutorial on how to reset the oil service required spanner/wrench maintenance indicator message light on Hyundai Sonata from the year 2014-2015-2016-2017-2018-2019-2020. Close all doors, Gear to the park position. Start the car engine.
For Hyundai Sonata years 2013, 2014, 2015 models the oil reset maintenance light system can also be reset as follows: Start the engine. If a service is due the display will show “Service required”.
Go under the hood and add oil. Turn on the engine and check the oil pressure gauge to make sure it rises. Let your Santa Fe run for a minute. Lower your Hyundai Santa Fe and turn off the engine. Take an oil reading on the dipstick. If the oil level isn’t at full, add a bit more oil. Thanks Kinldy rate the answer Smith Posted on Jul 08, 2009
How to reset service indicator on Hyundai Tucson?
But you have to activate and set the service interval feature by accessing the SERVICE INTERVAL menu. Press the OK button to access the menu and use the directional keypad to turn the SERVICE INTERVAL mode on and set the applicable interval. Turn the ignition off and then start the engine to verify the indicator has been reset.