How do you reset the odometer on a Harley Davidson?
To reset the trip-odometer to zero, press button to reset speedometer display to the ODOMETER mode and hold the button in for approximately 2 to 3 seconds. The speedometer will switch to the trip-odometer mode and reset the display to zero.
How do you check the engine light on a Harley Sportster?
Press and hold the odometer reset button. Put the ignition switch into the “IGNITION” position and take your hand off the odometer reset button. Check for “DIAG” to appear on your instrument cluster. Push the odometer reset button once more.
Where is the odometer button on a Harley Davidson Sportster?
This procedure applies to the 2013 and earlier Sportsters: Move the run/stop switch to the on position with the ignition off. Press and hold the odometer button. The button is located on the backside of your speedometer.
How to clear diag code on Harley Davidson Sportster?
Press and hold the trip button for five seconds to clear the code. Press the button to scroll through any additional codes, and the other computer modules. Turn the ignition switch to off to exit “diag” mode. This procedure applies to the 2013 and earlier Sportsters:
How to troubleshoot an ICM error code on a Harley?
Speedometer Self Diagnostics: The speedometer is capable of displaying and clearing speedometer, tachometer, TSM/TSSM and ICM/ECM Diagnostic Trouble Codes (DTC). Turn Ignition switch to OFF & Run/Stop switch is to Run. Push odometer reset button in & hold. Turn ignition switch to Ignition and release the odometer reset button.
What was the problem with my Harley Davidson speedometer?
Each time the speedo would drop close to zero. I coasted to the side and turned off run/kill switch and key. A quick visual showed nothing. After about 30-40 seconds turned it on, fired it up and no more issues before getting home. It was 30-35 miles of mostly freeway and it was hot (Houston summertime hot).
This procedure applies to the 2013 and earlier Sportsters: Move the run/stop switch to the on position with the ignition off. Press and hold the odometer button. The button is located on the backside of your speedometer.
Press and hold the trip button for five seconds to clear the code. Press the button to scroll through any additional codes, and the other computer modules. Turn the ignition switch to off to exit “diag” mode. This procedure applies to the 2013 and earlier Sportsters:
Speedometer Self Diagnostics: The speedometer is capable of displaying and clearing speedometer, tachometer, TSM/TSSM and ICM/ECM Diagnostic Trouble Codes (DTC). Turn Ignition switch to OFF & Run/Stop switch is to Run. Push odometer reset button in & hold. Turn ignition switch to Ignition and release the odometer reset button.
How do you clear ECM on Harley Davidson Sportster?
Clearing the codes, one you have recorded them, is just as easy with a few more presses of the button: Hold the button for five seconds with a code displayed until the display says “clear.” To move to the next module, just push and release the button and it will start flashing. Once finished, turn the ignition off.