How do you replace an axle on a Porsche Boxster?
When you have removed all the bolts that you can from this angle, release the brake, take the car out of gear, and rotate the wheel until you can reach the next set of bolts. When all of the bolts are removed, suspend the end of the drive axle with some rope or wire.
Is there a backup camera on a Porsche Boxster S?
We have worked on many of his vehicles in the past, and he was excited to start a new project with us. His requests for this vehicle were very clear. He wanted a backup camera that would show its image on the factory navigation screen, and a custom-installed laser and radar detector.
When did Porsche Boxster change their differential bearings?
In 1999, there was a change from two 46mm inner diameter differential bearings to one 46mm and one 50mm. When you install your differential, you will need to provide a measurement to the shop that provided the differential so that they can provide you with the appropriate shim set.
Is there a Porsche Boxster brake pads book?
The book contains 312 pages of full color projects detailing everything from performance mods to changing your brake pads. With more than 950+ full-color glossy photos accompanying extensive step-by-step procedures, this book is required reading in any Boxster owner’s collection. The book is currently available and in stock now.
How to replace a Porsche Boxster starter in 1997?
For 1997-99 cars, you may have to loosen the clamp that holds the accelerator cable in place. With everything disconnected on the throttle body, simply rotate it up and out of the way. You should now have access to the starter, the two bolts attaching it to the engine, and the three electrical connections located on the rear.
How many pages in the Porsche Boxster book?
The book contains 312 pages of full color projects detailing everything from performance mods to changing your brake pads. With more than 950+ full-color glossy photos accompanying extensive step-by-step procedures, this book is required reading in any Boxster owner’s collection.
When to replace the drive belt on a Porsche Boxster?
One of the routine maintenance items that you should perform on your Boxster is the checking and replacement of your accessory drive belt. The belts are driven off of the crankshaft and power accessories such as the water pump, power steering pump, alternator, and air conditioning compressor. There is only one belt on the car that powers it all.
Where is the crankshaft on a Porsche Boxster?
The crankshaft is in the center, shown by the orange arrow. To release tension on the belt, simply place a 24mm socket attached to a breaker bar on the idler and turn it clockwise (lower left). Here is a brand new crate 3.4L 996 motor direct from Porsche.