How do you remove a cartridge from a Moen kitchen faucet?

How do you remove a cartridge from a Moen kitchen faucet?

Cartridge Removal Use pliers on the white plastic tool and loosen the cartridge by twisting 1/4 turn each direction one at a time. After removing the white plastic tool, grasp the cartridge stem and pull it straight out of the valve (using pliers or an adjustable wrench). You can now install your new cartridge.

How do I know what model Moen faucet I have?

Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).

Where is the Moen model number located?

How do you remove a Moen single handle kitchen faucet handle?

Some Moen faucets have handles that remove by loosening the screw in the back of the handle. To loosen this screw use a 3/32″ hex wrench. After the handle has been removed unscrew the spout collar nut by turning counterclockwise then lift and rotate the spout.

How do I remove a single lever faucet handle?

Removing a Single-Lever Faucet

  1. Step 1: Turn off Main Water Valve. Before even starting to remove the single lever faucet, make sure you turn off the main valve of your water.
  2. Step 2: Detach the Handle.
  3. Step 3: Remove the Valve Screw.
  4. Step 4: Undo the Faucet Screws.
  5. Step 5: Remove the Metal Ring.
  6. Step 6: Remove the Faucet.

How do you repair a bathroom shower faucet?

How to Repair a Leaking Bathroom Shower Faucet Step 1 – Shut Off the Water Step 2 – Disassemble the Faucet Step 3 – Replace Bad Washer Step 4 – Check the Valve Stem Seat Step 5 – Remove the Seat and Replace It Step 6 – Grind the Seat Smooth Step 7 – Clean and Reassemble the Faucet Topics:

How do you replace a faucet valve?

How to Replace a Faucet Valve Stem Step 1 – Turn Off the Water and Faucet Step 2 – Cover the Drain and Open Handle Step 3 – Take Notes and Remove Screw Step 4 – Remove Handle and Disassemble Step 5 – Remove Stem and Go to the Store Step 6 – Check the Washer and Replace Fittings Step 7 – Replace Parts and Test

What are the parts of a bathroom sink faucet?

A faucet is a device for delivering water from a plumbing system. It can consist of the following components: spout, handle(s), lift rod, cartridge, aerator, mixing chamber, and water inlets.