How do you push the shift lock release?
To push the shift lock release, complete the following procedure. 1. Turn the ignition switch to the LOCK position and remove the key 2. Apply the parking brake. 3. Remove the shift lock release cover as shown. 4. Insert a small screwdriver in the shift lock release slot and push down.
How to release an automatic shift stuck in Park-car?
Then, take off the foot and move the shift into park. In this way, the car will not roll and the parking brake will hold its weight, not the gear and pawl. How do you release the shifter when it does not move from the park position?
How do you get a Hyundai shifter out of Park?
How to manually release Hyundai shifter. Set the parking brakes. Risk of vehicle rolling when the shifter is moved out of Park. Locate shift lock override and remove the cap. Insert a flat screwdriver into the access hole and press down. Move the shifter out of the park.
Then, take off the foot and move the shift into park. In this way, the car will not roll and the parking brake will hold its weight, not the gear and pawl. How do you release the shifter when it does not move from the park position?
What happens when you push the shift lock release button?
Nothing happened so after few minutes of trying, i just pulled it out of place and the gear shifted out of park. Thing is, if I put that back into the hole, would it be able to help the car go out of park again when it doesn’t work while pushing on the brakes, cause I just pulled it out abruptly.
What to do when your shift lock is stuck?
It is not necessary to start the engine. 3) Locate the shift lock override slot located on the shifter console near the shifter lever. Normally, the slot is plugged with a small plastic cap. Remove the cap. 4) Insert a small screwdriver, nail file, key or similarly shaped object into the override slot, push down and hold.
How to manually release Hyundai shifter. Set the parking brakes. Risk of vehicle rolling when the shifter is moved out of Park. Locate shift lock override and remove the cap. Insert a flat screwdriver into the access hole and press down. Move the shifter out of the park.