How do I reset my D-Link DIR-600 password?

How do I reset my D-Link DIR-600 password?

Locate the reset pin hole on the back of the DIR-600 as per below: 2. Insert a paperclip into the reset pin hole and hold in for 10 seconds. While holding in the reset button, refer to the Power LED, when it turns yellow/orange, release the paperclip holding in the reset button.

How do I reset my Dlink DIR-615 router?

To reset the D-Link DIR-615 to its default settings, you have to do the following steps:

1. Put router into operation.
2. Press RESET button and hold for at least 10 seconds.
3. Restart of the device is automatically executed.
4. Default settings have been restored.

What is the default password for Dlink camera?

Type 192.168. 0.20 (the default IP to access the admin interface) in the address bar of your internet browser to access the router’s web-based user interface. The default username for your D-Link DCS-936L camera is admin. The default password is (blank).

What is the default username and password for D-Link router?

Step 1: Open your web browser and enter http://dlinkrouter or http://dlinkrouter.local or http://192.168.0.1 into the address bar. The default username is Admin and the password is blank (nothing). Click Login. Step 4: Scroll down the page to “Wireless Security Mode”.

How do I open my Dlink DIR-615 router?

Configuration for D-Link DIR-615

1. Visit the router’s IP address (http://192.168.0.1) in a new browser window.
2. Enter the router password.
3. Click on the Manual Internet Connection Setup button at the bottom.
4. Enter the OpenDNS addresses in Primary DNS Server and Secondary DNS Server fields.

How do I reset my D-Link DIR-615 password?

DIR-615 Default Password Doesn’t Work?

1. Plug in the router and turn it around where all the cables are connected.
2. Use a paperclip or other small object to hold down the Reset button for 30 seconds.
3. Wait for 30 to 60 seconds while the router finishes booting up.

How do I Reset my D-Link dir-600 router password?

If you don’t know the new login information, reset the D-Link DIR-600 router to its factory settings, which will restore the username and password back to the default. To reset the DIR-600 router: Power on the router and flip it around so you have access to the back where the cables are connected.

What’s the default password for a D-Link router?

By default, most D-Link routers don’t require a password to log in to the router interface. This is true for the DIR-600, just leave the password field blank. However, D-Link routers such as the DIR-600 do have a username. The default username for the DIR-600 is admin. The default IP address for the D-Link DIR-600 is 192.168.0.1.

What happens when the default password is changed on a dir-600 router?

When the default username and password for the DIR-600 is changed, you must remember a new set of credentials instead of these default ones. If you don’t know the new login information, reset the D-Link DIR-600 router to its factory settings, which will restore the username and password back to the default.

How do I connect my computer to my dir-600 router?

ADVANCED SET-UP (ACCESS VIA IP ADDRESS) to configure dIR-600 manually (without the set-up cd) connect your computer to the dIR-600 using the ethernet cable provided. then connect the power cable on the dIR-600. the power light will display as solid blue. then simply open a browser window and enter the Ip address in the browser address field: