How do I remove the dash panel on a Toyota Tacoma?
How to Remove the Dashboard From a Toyota Tacoma
- Pull the ashtray out.
- Wedge a screwdriver under the bezel around the radio and pry the bezel off.
- Remove the screw bolts on the driver and passenger sides of the dash.
- Remove the screw bolts on the driver’s and passenger’s side kick panel underneath the dash.
How do you remove the glove box on a 2017 Tacoma?
All You will need to do is open the glove boxAnd let it rest open. Now grab the sides of it with each hand and You’re going to want to push in. While You are pushing inward You’re going to need to first pull it up and the pull it outward.
How do you remove the glove box on a 2016 Tacoma?
How do you change the lights on a Toyota Tacoma?
Use your wrench to remove the nut holding the negative terminal in place, then wrap it in a towel so it doesn’t touch any metal and cause a spark. Figure 2. Remove negative battery terminal. Remove the HVAC knobs by pulling them out. Then remove the face off by pulling it out. At the bottom of the center console, there are clips.
How do you change the dashboard trim on a Toyota Tacoma?
Remove the two Phillips screws at the top holding the dashboard trim in place. Remove the bottom trim. There is a Phillips screw, and two 10mm bolts on each side of the steering wheel. Lower the bottom trim, but don’t remove it all the way. Remove the Phillips screw in the bottom center of the steering column.
How do you change the battery in a Toyota Tacoma?
Disconnect the negative (black) battery terminal from under the hood. Use your wrench to remove the nut holding the negative terminal in place, then wrap it in a towel so it doesn’t touch any metal and cause a spark. Figure 2. Remove negative battery terminal. Remove the HVAC knobs by pulling them out. Then remove the face off by pulling it out.
How do you replace the climate control on a Toyota Tacoma?
Pull trim out. Remove the Phillips screws holding the climate control system in place. When you pull it out a little bit, unplug the electrical connections plugged into it. If you need to replace any bulbs on the back of it, just twist the bulb to remove it, then install the new one in place. Figure 7. Remove climate control. Figure 8.