How do I get my power washer to work?
Pressure Washer Tips: Operating procedures
- Clean any debris from the inlet filter.
- Connect any accessories (like this chemical injector).
- Run water through the washer for one minute to prime the system and remove any air.
- Squeeze the spray wand trigger to bleed water pressure.
- Pull the starter cord to start the engine.
Do you turn the water on before or after you start a pressure washer?
Turn on the water. The pressure washer and hose will fill with water, so it is important to purge the system of excess air before starting the unit. Simply squeeze the trigger on the gun and the air will release.
What is the clear hose on a pressure washer?
The clear hose is the semi-soft pliable PVC (plastic) tubing that runs from the Y-connector that comes off the two cleaning tanks on the support handle down to the hose barb on the water pump.
How do you start a pressure washer after sitting?
Start by connecting your garden hose to the pressure washer and turning on the water. Connect your high-pressure hose and wand. Pull the trigger on the wand to allow trapped air to escape. With the water running, hold the wand’s trigger open with one hand (pointed in a safe direction) while you start the engine.
What kind of soap do you use in a Honda power washer?
While there are plenty of detergents out there, some can be too harsh to your pressure washer machine and to the environment. Dawn dish soap is one of the best formula to use in your pressure cleaner. Other than having great grease cutting power, Dawn will not damage your pressure washer or harm plants around.
Can you use a garden hose on a pressure washer?
Garden hoses can be used for pressure washers. Pressure washers are made for the highest level of pressure, typically ranging from 1,300 – 2,400 psi. Some pressure washers even require a hose that can hold up to 4,000 psi. Nonetheless, if you don’t need that much pressure, a regular garden hose might do.