How do I fix Error 22 on my scanner?
To resolve the issue, reset the printer.
- With the printer turned on, disconnect the power cord from the printer.
- Unplug the power cord from the power source.
- Wait 60 seconds.
- Reconnect the power cord to a wall outlet and to the printer. note: HP recommends plugging the printer directly into a wall outlet.
How do I reset my HP printer scanner?
To reset the scanner, follow these steps:
- Close the HP Smart Document Scan Software and HP Scanner Tools Utility, if they are open.
- Press the Power ( ) button to turn off the scanner, and then disconnect the power supply from the scanner.
- Wait 30 seconds.
- Reconnect the power supply, and then turn on the scanner.
How do I fix a scan error on my HP printer?
- Windows: Download HP Print and Scan Doctor. Mac: Use Diagnose & Fix through HP Smart.
- Run HPPSdr.exe from the download location on your computer.
- Once HP Print and Scan Doctor is open, click Start, and then choose your printer. If your printer is not listed, turn it on and click Retry.
- Click Fix Scanning.
How do I fix a scanner Error 23?
Scanner Error 23
- Switch off the printer.
- Unplug power cable.
- Press the power button on the printer, it will switch on for a second and go off, this is to drain the remaining power.
- Plug the power cable back in.
- Switch on the printer.
- Scanning must work now.
How do I fix a scanner Error 13?
Recommend you to do a hard reset on the printer. (Turn off the printer, disconnect all the cables, wait for a minute, connect the power cord of the printer to wall outlet directly, do not use any surge protector.) Turn the printer On and try to make a copy.
What does supply memory error mean?
A supply memory error happens when the metal contacts / chip on a toner cartridge don’t correctly connect with the corresponding contacts inside the printer. The printer cannot detect the toner cartridge and displays the ‘Supply Memory Error’ message on the printer display panel.