How do I change the fuse in my subwoofer?
How to Replace a Subwoofer Fuse
- Step 1: Troubleshoot the System.
- Step 2: Locate the Fuse.
- Step 3: Determine the Type of Fuse.
- Step 4: Disconnect the Power.
- Step 5: Remove the Old Fuse.
- Step 6: Replace the Fuse.
- Step 7: Test the System.
What should I do if my subwoofer fuse is not working?
Before even replacing a subwoofer fuse, make sure that it is actually the source of your dilemma. Check all connections first, including the battery, speaker wirings and radio. Try to make the subwoofer work normally. If it doesn’t want to work, grab the owner’s manual and read through it to determine where the fuse is located.
Where are the fuses on a subwoofer located?
Fuses for subwoofers can be located in-line with the subwoofer wires, within the speaker enclosure, and if there is an amp dedicated to the subwoofer, the fuse could be located there. In-line fuses can have different looks. One type of in-line fuse is in a tube located on the wire, or rather at a junction between one end of the wire and the other.
How do you turn off a subwoofer?
Set the volume on the back of the active subwoofer to the middle position. If the subwoofer has a cut off frequency adjustment, set it to the maximum position to pass all low frequencies to the subwoofer. If your subwoofer has a standby function, turn it off. Connect one end of the audio cable to the subwoofer audio input connector.
How to troubleshoot no sound coming from an Active Subwoofer?
A separate article about the difference between an active subwoofer and a passive subwoofer is available. Select Settings. Select Speaker. Select Speaker SP. Make sure that the Speaker pattern ends in either a .1 or .2. NOTE: If a pattern that ends in .0 is selected, the subwoofer will not work.
Before even replacing a subwoofer fuse, make sure that it is actually the source of your dilemma. Check all connections first, including the battery, speaker wirings and radio. Try to make the subwoofer work normally. If it doesn’t want to work, grab the owner’s manual and read through it to determine where the fuse is located.
Fuses for subwoofers can be located in-line with the subwoofer wires, within the speaker enclosure, and if there is an amp dedicated to the subwoofer, the fuse could be located there. In-line fuses can have different looks. One type of in-line fuse is in a tube located on the wire, or rather at a junction between one end of the wire and the other.
What are the different types of fuses and where to find them?
There are two kinds of fuses that you have to expect. One is the usual tube-type fuse, which is about an inch long. This can be found between two connecting wires that should be enclosed in a holder. The other type of fuse is a flat, square, plug-in type. This can also be found at a similar location.