How can I fix 2003 Harley flhtcui circuit breaker shutdown?

How can I fix 2003 Harley flhtcui circuit breaker shutdown?

I called Harley in Milwaukee and they said to put new connectors on the wires to the CB and solder them. Did that. I tested one breaker but not all of them. The bike has power to start and go, then it will shut down on its own.

Why is my circuit breaker on my Harley not working?

The fuse didn’t blow either, so the way I wired it has to be wrong. That means nothing. You need to determine if the breaker is even the issue as it sounds like it is not.

Can a circuit breaker be shut off randomly?

Sometimes they are not seated correctly if disconnected too. Yes, the battery cable, especially the ground side, would shut it down randomly. If, you do find that the breaker is shut off, the positive side could be, but rarely is with your symptoms, the cause. As that would be more consistent.

What causes a Harley Davidson circuit breaker to shut down?

there are very few things that can cause a loss of all electrical. chassis ground stud to battery negative. battery positive stud to starter solenoid. from the same stud, there is a small wire which attach’s to the main circuit breaker, copper stud.

Why does my Harley Davidson have no power?

Last Friday I shut the motor off with the stop switch and then turned the ignition key off. I re-set the stop switch to On. 1 minute later, I turned the ignition switch to ignition and noticed I had no power to my headlights and instrument lights.

What should I do if there is no power to the ignition?

1) Battery is good. 2) Battery cables and connections are good. 3) Stop or kill switch was taken apart and tested. 4) Circuit breakers for ignition, instruments, lights, accessories, and main breaker were tested for continuity. 5) Continuity of wires from ignition switch to main breaker were tested.

Is there any power to the ignition switch?

I noticed that I had power from the accessory mode of the ignition switch. Horn, brake lights, turn signals have power. Bike is at home. This is what I tested (most with a meter) and cleaned: 1) Battery is good. 2) Battery cables and connections are good. 3) Stop or kill switch was taken apart and tested.

I called Harley in Milwaukee and they said to put new connectors on the wires to the CB and solder them. Did that. I tested one breaker but not all of them. The bike has power to start and go, then it will shut down on its own.

What are the fuses on a 2001 Chevy Silverado?

Repair Topics > Fuses > Chevrolet > 2001 Chevrolet Silverado… IGN A Fuse #3 40A Starter Relay, Ignition Switch IGN 1. TURN. SEO IGN Fuses PARK LP Fuse #12 30A Park Lamp Relay. Healamp and Panel Dimmer Switch Park Lamps STOP LPS Fuse #14 20A VEH STOP and CHMSL Fuses. Trailer Wiring (LH.

The fuse didn’t blow either, so the way I wired it has to be wrong. That means nothing. You need to determine if the breaker is even the issue as it sounds like it is not.

Where are the fuse panels on a Ford E-150?

Here you will find fuse box diagrams of Ford E-Series 1998, 1999, 2000 and 2001 (E-150, E-250, E-350, E-450), get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.