How big should the spark plugs be on a Porsche Cayenne?
Torque the spark plugs to 30 Nm (22 ft-lbs). Porsche published a bulletin indicating that it doesn’t recommend using anti-seize compound on spark plugs for any of their engines (Porsche Technical Bulletin 9102, Group 2 identifier 2870).
How long does it take to change spark plugs in Cayenne?
One such project we decided to tackle is changing the plugs in our Porsche Cayenne. While changing the plugs in our 993 can be a bit of a challenge (think dropping the motor), doing so in a 2009 Cayenne V6 is a breeze. This was our first plug change on the Cayenne and it took less than 60 minutes.
How do you change the spark plug on a Porsche?
Torque spark plugs. Use a torque wrench to torque all the spark plugs to 30 Nm. Install ignition coils. Push the ignition coil in the spark plug hole. Tighten the ignition coil bolt to 10 Nm. Connect the connector for each ignition coil making sure you push the connector until you hear it click.
Where are the coil packs on a Porsche Cayenne?
In practice though, the plugs in the Cayenne last a very long time. The coil packs are usually more of a problem. If you notice a slight roughness when the car accelerates sometimes along with a check engine light, you may want to investigate further. On the Cayenne V8 models, there are eight coil packs that sit on top of each spark plug.
Can a spark plug be replaced on a Cayenne?
With the new plugs installed and tightened to the correct torque, you can replace the coils and reattach the coil connectors. Now reattach the coil pack covers, secondary air pumps and engine covers and you’re good to go.
Torque spark plugs. Use a torque wrench to torque all the spark plugs to 30 Nm. Install ignition coils. Push the ignition coil in the spark plug hole. Tighten the ignition coil bolt to 10 Nm. Connect the connector for each ignition coil making sure you push the connector until you hear it click.
In practice though, the plugs in the Cayenne last a very long time. The coil packs are usually more of a problem. If you notice a slight roughness when the car accelerates sometimes along with a check engine light, you may want to investigate further. On the Cayenne V8 models, there are eight coil packs that sit on top of each spark plug.
How to remove torque strut from Porsche Cayenne?
To remove the torque strut, you’ll need a 12mm triple square socket and a regular 16mm socket. At the engine end of the torque strut, place the triple square socket in the front of the bolt while counter holding the 16mm nut at the rear.