How big are the brakes on a Saab 9-3?

How big are the brakes on a Saab 9-3?

The inch size designation are used by Saab to show, roughly, what size of wheel will fit over the brake. I’m not near my data at the moment, but the front disc sizes on the 9-3 SS are… The 17 inch brakes are the same as the Hirsch upgrades on both the 9-3 and 9-5. Early 2.0T Aeros had 314 mm discs, but later ones went down to 302 mm.

What kind of discs do I need for my Saab 9-3?

If you’re not sure what size discs you require, see my guide on how to ascertain brake disc sizes. This documentation will walk you through the process of replacing pads and discs on your Saab 9-3.

How big is the split on a Saab B207?

Typically you will see a split that is something like 15″ on the 1.8XE and some B207, 16″ on an early B207L and B207R, 16″+ on later Aero models and 17″ on Turbo X and 2.8 XWD varients. 2006 9-5 Aero estate – Hirsched. The inch size designation are used by Saab to show, roughly, what size of wheel will fit over the brake.

What is the 7th code on a Saab Turbo?

The 7th code is the front disc and the 9th code is the rear disc. Help support SaabTechTalk by making a Lump Sum donation or by opening a subscription. Options available are in your Profile/Actions. 345mm were also fitted to the Turbo X…15,16″ etc related to the wheel size not the disc..

Where can I buy genuine Saab brake pads?

Neo brothers advertise a kit of genuine SAAB discs and pads for £102 inc. the vat. Have a look on the plate on the outer side of the caliper some of the disc sizes have been stamped onto them.. Where do I find the brake codes?

When did Saab start putting brake codes on door jambs?

Around 2006, Saab started to put brake codes on the door jamb. Don’t assume if you have a Linear, that you will have 285 mm front rotors and solid 278 mm rears. I have a 2005 Linear (2.0t) with 302 mm front and vented 292 mm rears.

The inch size designation are used by Saab to show, roughly, what size of wheel will fit over the brake. I’m not near my data at the moment, but the front disc sizes on the 9-3 SS are… The 17 inch brakes are the same as the Hirsch upgrades on both the 9-3 and 9-5. Early 2.0T Aeros had 314 mm discs, but later ones went down to 302 mm.

If you’re not sure what size discs you require, see my guide on how to ascertain brake disc sizes. This documentation will walk you through the process of replacing pads and discs on your Saab 9-3.

Around 2006, Saab started to put brake codes on the door jamb. Don’t assume if you have a Linear, that you will have 285 mm front rotors and solid 278 mm rears. I have a 2005 Linear (2.0t) with 302 mm front and vented 292 mm rears.

How big are the brakes on a 9-3 SS?

I’m not near my data at the moment, but the front disc sizes on the 9-3 SS are… The 17 inch brakes are the same as the Hirsch upgrades on both the 9-3 and 9-5. Early 2.0T Aeros had 314 mm discs, but later ones went down to 302 mm. I think all the 2.8 V6 engined cars with front wheel drive got 314 mm.

Why are my brake pads not working on my Saab 93?

If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: RNBH13Mz2hOece0-)

Typically you will see a split that is something like 15″ on the 1.8XE and some B207, 16″ on an early B207L and B207R, 16″+ on later Aero models and 17″ on Turbo X and 2.8 XWD varients. 2006 9-5 Aero estate – Hirsched. The inch size designation are used by Saab to show, roughly, what size of wheel will fit over the brake.

I’m not near my data at the moment, but the front disc sizes on the 9-3 SS are… The 17 inch brakes are the same as the Hirsch upgrades on both the 9-3 and 9-5. Early 2.0T Aeros had 314 mm discs, but later ones went down to 302 mm. I think all the 2.8 V6 engined cars with front wheel drive got 314 mm.

How to replace brake pads on a 2007 Saab 9-3?

And if you are doing a 2007 9-3 and are replacing the rotors, expect to remove the caliper holders using an E20 torx socket (not found in your corner shop) in order to free the rotors. Expect to not be able to budge at least one of the 4 bolts (2 each side) laying on the ground no matter how long your breaker bar is.

How big are the brake rotors on a Saab?

If you change the brake rotors, make sure that you buy the correct size. Look or measure your current rotors first. Around 2006, Saab started to put brake codes on the door jamb. Don’t assume if you have a Linear, that you will have 285 mm front rotors and solid 278 mm rears.

How do you remove a brake pad from a car?

Remove the inner brake pad from the caliper and the outer brake pad from the bracket. Clean the inside of the brake caliper and check the dust covers. 1. Lubricate the pad sliding surfaces with Special paste. 2. Place the outer brake pad into the carrier. Fit the inner brake pad into the hydraulic body.

Is there free shipping on Saab 9-3 parts?

As always, free shipping is available on your Saab 9-3 parts order totaling $50 or more. There we so many great pictures submitted that could have gone here, but this coming all the way from Japan features a 2001 Saab 9-3 2.0T.

When did the Saab 9-3 Viggen come out?

Only 4,600 Saab 9-3 Viggens were made. Saab manufactured the second generation 9-3 from 2002-2012, and once again they modified many of the Saab 9-3 parts. Safety features were upgraded, the hatchback design was eliminated, and a new 2.0L straight-4 engine was added.

Can You tune a 2007 my 9-3 Saab?

Note: If you have a car that is older than a 2007 MY 9-3, there are a few other steps that need to be taken, but the process is surprisingly straight-forward. First, you select “Program Vehicle” and “OK”. The Tuner will proceed to back-up the original software on your car’s ECU: nice touch.

As always, free shipping is available on your Saab 9-3 parts order totaling $50 or more. There we so many great pictures submitted that could have gone here, but this coming all the way from Japan features a 2001 Saab 9-3 2.0T.

Only 4,600 Saab 9-3 Viggens were made. Saab manufactured the second generation 9-3 from 2002-2012, and once again they modified many of the Saab 9-3 parts. Safety features were upgraded, the hatchback design was eliminated, and a new 2.0L straight-4 engine was added.

What kind of turbocharger for Saab 9-3 2.0?

We have taken the 9000 Aero proven Mitsubishi TD04 Turbocharger, and developed a fitting kit around it to offer a totally reliable installation for the SAAB 9-3 2.0 Turbo Engine. A new Mitsubishi TD04 Turbo. Gas flowed exhaust manifold, matched to flow perfectly into the larger inlet turbine port of the TD04.