Do Hyundai Sonatas have spare tires?
The 2018 Hyundai Sonata doesn’t have a spare tire. You should change Your tires every 30,000 to 50,000 miles or so. You don’t want to get into any wrecks on the road.
What should I do if I have a flat tire on my Hyundai Sonata?
When using a compact spare tire, observe the following precautions: Under no circumstances should you exceed 50 mph (80 km/h); a higher speed could damage the tire. Ensure that you drive slowly enough for the road conditions to avoid all hazards. Any road hazard, such as a pothole or debris, could seriously damage the compact spare.
Where to place tire jack in Hyundai Sonata?
Place the jack at the designated locations under the frame. To reduce the possibility of injury, be sure to use only the jack provided with the vehicle and in the correct jack position; never use any other part of the vehicle for jack support. Place the jack not to damage to the plastic guard.
How do you change a tire on a Hyundai Santa Fe?
Insert the jack handle into the jack and turn it clockwise, raising the vehicle until the tire just clears the ground. This measurement is approximately 1.2 in (30 mm). Before removing the wheel lug nuts, make sure the vehicle is stable and that there is no chance for movement or slippage. 9. Loosen the wheel nuts and remove them with your fingers.
How do you change a tire on a Hyundai Elantra?
Loosen the wheel nuts and remove them with your fingers. Slide the wheel off the studs and lay it flat so it cannot roll away. To put the wheel on the hub, pick up the spare tire, line up the holes with the studs and slide the wheel onto them. If this is difficult, tip the wheel slightly and get the top hole in the wheel lined up with the top stud.
When using a compact spare tire, observe the following precautions: Under no circumstances should you exceed 50 mph (80 km/h); a higher speed could damage the tire. Ensure that you drive slowly enough for the road conditions to avoid all hazards. Any road hazard, such as a pothole or debris, could seriously damage the compact spare.
Place the jack at the designated locations under the frame. To reduce the possibility of injury, be sure to use only the jack provided with the vehicle and in the correct jack position; never use any other part of the vehicle for jack support. Place the jack not to damage to the plastic guard.
Loosen the wheel nuts and remove them with your fingers. Slide the wheel off the studs and lay it flat so it cannot roll away. To put the wheel on the hub, pick up the spare tire, line up the holes with the studs and slide the wheel onto them. If this is difficult, tip the wheel slightly and get the top hole in the wheel lined up with the top stud.
Insert the jack handle into the jack and turn it clockwise, raising the vehicle until the tire just clears the ground. This measurement is approximately 1.2 in (30 mm). Before removing the wheel lug nuts, make sure the vehicle is stable and that there is no chance for movement or slippage. 9. Loosen the wheel nuts and remove them with your fingers.