Can a Camry battery be hooked up wrong?
It is also on a gen 6 Camry 2009 le. I did my biggest screw up today I went to hook up a new battery and didn’t notice the terminals were opposite of the old one. I hooked up one and as soon as I touched the other terminal it sparked and the horn honked. I straightened it out but now the car won’t start. I checked all the fuses and found one blown.
What should I do if my battery isn’t hooked up?
If so, and if it’s working normally, then you’re done…the rectifer is fine. Tach won’t work with a blown rectifier. Next, if you have no tach, measure the voltage across the battery with engine off. Start the engine and measure the battery voltage again. If the voltage is higher with the engine running, then you are good to go.
Where is the 120 amp fuse on my car?
Look under the dash at the coin holder, you will have to lay on your back. The 120 amp fuse is the 82620-33030 numbered one. The car will start with this fuse open, but you will have weird symptoms on the dash and the battery will not be charge as the alternator isn’t connected to the battery. Accident w/frame damage, got rid of car.
What happens if you hook up the battery to the 2nd post?
A big ol’ spark warned me off just as I touched the 2nd cable to the 2nd post. Nothing was harmed, not even the rectifier. Now, these guys are probably correct, you have let all the smoke out of the rectifier, and it won’t work without it’s smoke, and it’s almost impossible to get all the smoke back in there.
Can a battery be hooked up to the wrong terminal?
Mistakes happen and hooking up battery cables on your mower to the wrong terminals is unfortunate, but possible. This is a page about what to do if you hooked up your mower battery to the wrong terminals. Ask a Question Here are the questions asked by community members.
It is also on a gen 6 Camry 2009 le. I did my biggest screw up today I went to hook up a new battery and didn’t notice the terminals were opposite of the old one. I hooked up one and as soon as I touched the other terminal it sparked and the horn honked. I straightened it out but now the car won’t start. I checked all the fuses and found one blown.
What happens if you hook up the wrong battery on a lawn mower?
Shorting out the alternator, starter and some fuses are all likely if a person has hooked up the battery wrong on anything. You will need to test the cable, the electrical system and heck to see if the switch under the seat has been tripped or not.
What happens if you hook up a car battery incorrectly?
If you aren’t clear, and concise, in your claim, you might lose your claim. You need to go to the shop manager or store manager for resolution. You should not have to pay for any parts or labor for the new alternator. Hooking up the battery incorrectly blew the alternator.
What is the 120 amp fuse on a Toyota?
The 120 amp fuse is the 82620-33030 numbered one. The car will start with this fuse open, but you will have weird symptoms on the dash and the battery will not be charge as the alternator isn’t connected to the battery. Accident w/frame damage, got rid of car. No Toyota in possession, now. Where under the dash– I will get out the book.
What happens when you hook a car battery up backwards?
Hooking the battery up backwards will blow fuses. The 100 amp fusible link is also likely blown out. Do a visual check in the fuse/relay box with a flashlight. The blown fusible link will be easy to spot.
Can a reverse polarity fuse blow a fuse?
My father-in-law recently bought a Hyundai Genesis that has an internal switch preventing reverse polarity hookups from damaging the electronics. Hopefully more manufacturers will do this to prevent what is a very common mistake. You can see into these big fuses and they don’t appear blown.
Can a car be connected to a car backwards?
Connected new battery backwards, now car won’t start. I have a 1992 Camry. I bought a new battery and connected it to my car backwards. I didn’t try to start it though because once I connected the terminals there was a small spark.
How to relearn throttle on a new battery?
Throttle relearn procedure/New battery/Won’t Idle or Run Step 1: Turn the key to the ON position but do not start. Step 2: Press the accelerator pedal ALL THE WAY to the floor and hold it for 40 seconds. Step 3: Release the accelerator pedal ALL THE WAY and count for 35 seconds. Step 4: Press the