Why was my drive cycle not completed by Nissan?
THEY WERE UNABLE TO PERFORM/COMPLETE THE TEST DUE TO THE FACT THAT MY OBD WAS “NOT READY”. I DIDN’T FAIL, MORE LIKE AN INCOMPLETE. APPARENTLY THIS WAS BECAUSE I HAD THE BATTERY DISCONNECTED AND HAD NOT DRIVEN/STARTED THE ENGINE FOR SOME PERIOD WHILE DOING SOME RECENT UPKEEP/REPAIRS (NONE OF WHICH INVOLVED THE EMMISSION SYSTEM).
How do I complete a Nissan Xterra drive cycle?
Follow the OBD II Drive Cycle below in order to set your Nissan’s emission monitors. This OBDII drive cycle begins with a cold start (coolant temperature below 122 degrees F). We recommend achieving this by allowing the vehicle to cool down overnight, and beginning the drive cycle process the following day.
How much does a Nissan Drive cycle cost?
ONE DEALERSHIP SAID THAT BECAUSE IT WAS A “LENGTHY PROCESS”, THAT I COULD ALWAYS COME IN, AND THAT FOR $250, A TECH COULD RUN THROUGH THE DRIVE CYCLE IN A FEW HOURS TIME FOR ME! SO MUCH FOR THAT. I AM STILL UNSURE EXACTLY WHAT MY DRIVE CYCLE IS.
How does a drive cycle test work on a car?
It involves a special test drive that duplicates the scenario of a person starting the car and making a short freeway trip, as if driving to work. While the drive cycle test is going, the engine computer runs a series of tests or “readiness monitors” to see if the emissions system is working properly.
THEY WERE UNABLE TO PERFORM/COMPLETE THE TEST DUE TO THE FACT THAT MY OBD WAS “NOT READY”. I DIDN’T FAIL, MORE LIKE AN INCOMPLETE. APPARENTLY THIS WAS BECAUSE I HAD THE BATTERY DISCONNECTED AND HAD NOT DRIVEN/STARTED THE ENGINE FOR SOME PERIOD WHILE DOING SOME RECENT UPKEEP/REPAIRS (NONE OF WHICH INVOLVED THE EMMISSION SYSTEM).
Follow the OBD II Drive Cycle below in order to set your Nissan’s emission monitors. This OBDII drive cycle begins with a cold start (coolant temperature below 122 degrees F). We recommend achieving this by allowing the vehicle to cool down overnight, and beginning the drive cycle process the following day.
ONE DEALERSHIP SAID THAT BECAUSE IT WAS A “LENGTHY PROCESS”, THAT I COULD ALWAYS COME IN, AND THAT FOR $250, A TECH COULD RUN THROUGH THE DRIVE CYCLE IN A FEW HOURS TIME FOR ME! SO MUCH FOR THAT. I AM STILL UNSURE EXACTLY WHAT MY DRIVE CYCLE IS.
What is the purpose of a drive cycle?
While the drive cycle test is going, the engine computer runs a series of tests or “readiness monitors” to see if the emissions system is working properly. What Is the Purpose of a Drive Cycle? When a vehicle has an emissions system problem, it almost always triggers a Check Engine or Service Engine Soon Light.
What kind of drive does a 2004 Nissan Murano have?
The Used 2004 Nissan Murano comes with all wheel drive, and front wheel drive. Available transmissions include: continuously variable-speed automatic, continuously variable-speed shiftable automatic.
What did I do to my Nissan Murano?
Had it welded and seat put back, power seat mechanism slips slightly Replaced radiator Replaced power steering parts Now, the car is hard pressed to go over 40mph uphill. When going over 50, drives smoothly, but unsure what the cause is…catalytic converter, fuel pump, fuel injectors, or spark plugs.
When did the Nissan Murano start burning oil?
So many issues where do I begin, bought the 04 Murano in 06. It ran good until it hit 100K. The engine started burning oil about a quart/week. No that’t not normal. The suspension is the worst I have seen on any car.
Why did my Nissan Leaf fail the drive cycle?
I DIDN’T FAIL, MORE LIKE AN INCOMPLETE. APPARENTLY THIS WAS BECAUSE I HAD THE BATTERY DISCONNECTED AND HAD NOT DRIVEN/STARTED THE ENGINE FOR SOME PERIOD WHILE DOING SOME RECENT UPKEEP/REPAIRS (NONE OF WHICH INVOLVED THE EMMISSION SYSTEM). THIS LED TO THE OBD RESETTING ALL OF ITS STORED LEARNED MEMORY OF THE EMMISSIONS SYSTEM.
Why did my Altima 2.5L not start up?
My 2013 altima 2.5L could not start an engine. It turned on P0101 and P2119. After replacing an air filter and cleaning MAF and throttle body, it seemed that everything is fine. However, in the next day, ECM set P0101 again. I replaced MAF filter and PCV valve, but it could not solve my problem.
How much does a Nissan Altima patch cost?
And according to the lawsuit, if a consumer has the repair plate installed, the Altima owner will need to pay about $500 toward the repair offered by the bulletin, even though the materials for the repair cost only $111.57. FWIW my patch repair was in the $400 range too…but I removed/replaced the carpet and seat myself.
When does the ECM set p0101 on a Nissan?
I found that ECM set P0101 only when my car starts an engine. ECM has never set confirmed or pending P0101 during driving. There was no exception for more than 10 samples. So, I conclude that there is no drivability issue and my car may need to reprogram the ECU according to TSB from nissan.
How often should you turn off the engine in a Nissan?
EVERYTHING RANGING FROM “30-40 MIN’S OF FREEWAY DRIVING SHOULD DO THE TRICK”, TO NEEDING TO DRIVE “50 MILES OF REGULAR STOP-AND-GO AND 75 MILES OF FREEWAY.” I WAS EVEN TOLD THAT I NEEDED TO “TURN THE ENGINE OFF THREE (3) TIMES DURING A 20 MILE STRETCH OF FREEWAYING (60MPH+).”
How long does it take to reset ECM in Nissan?
The engine must have been operated for a minimum of 17 minutes before performing step 11.11. Accelerate as steadily as possible (A/T in D with OD ON) to 53-60 MPH and cruise for 3 minutes. The accelerator pedal must be held very steady during this step.
EVERYTHING RANGING FROM “30-40 MIN’S OF FREEWAY DRIVING SHOULD DO THE TRICK”, TO NEEDING TO DRIVE “50 MILES OF REGULAR STOP-AND-GO AND 75 MILES OF FREEWAY.” I WAS EVEN TOLD THAT I NEEDED TO “TURN THE ENGINE OFF THREE (3) TIMES DURING A 20 MILE STRETCH OF FREEWAYING (60MPH+).”