Why my radiator fan is not working?
Defective temperature switch, coolant sensor or other sensor. Engine thermostat is stuck OPEN (engine never gets hot enough to turn on the fan) Faulty fan relay. A wiring problem (blown fuse, loose or corroded connector, shorts, opens, etc.)
What kind of relay do I need for a radiator fan?
Purchase a 4-post relay with a 30-amp rating. Locate the relay in immediate proximity to the fan being used. Find a spot to secure the relay with a screw or a bolt. Install a 10-gauge wire to the battery positive terminal with the use of a round electrical connector.
What is the function of the cooling fan relay?
The cooling fan relay essentially functions as the switch for the engine’s cooling fans, and is therefore an important electrical component of the vehicle’s cooling system.
What are the symptoms of a bad cooling fan relay?
1. Engine running hot One of the first symptoms commonly associated with a bad or failing cooling fan relay is an engine that runs hot or overheats. If you notice that your engine is running at higher temperatures than normal, that may be a sign that the relay is not functioning properly.
Is there a way to test a radiator fan?
You can test the electrical radiator fans by taking a wire from the car battery, unplug the radiator fan connector, and put 12v+ and ground into the connector. This is the fastest and easiest way to test your radiator fans. Because the radiator fan is often drawing so much power, there is often a relay that is powering the coolant fan.
How do you test a radiator fan relay?
Open your hood and take some time to locate your fusebox, which is mounted in front of the passenger side of the firewall. Remove the top cover to expose your fusebox and relays, check your radiator fan relays and remove them. Inspect for any damage to the pins or the body of the relay, such as bubbling or melting.
What is the function of a radiator fan relay?
The function of the cooling fan relay is to convert a low voltage signal from either the electronic control module (ECM) or a thermostatically controlled sensor. The cooling fan relay takes the low voltage signal and internally switches the relay “on” to allow battery voltage to be supplied to the radiator cooling fan.
What causes radiator fan to keep running?
Two things will make your radiator fan run on fast. Either a signal that the engine is hot or that the air conditioning condenser (located in front of the radiator) is telling it that it’s hot and to run fast to cool it down.
Why is your radiator fan not running?
The most common causes when a radiator fan is not coming on is broken fuse, bad wirings, bad coolant temperature sensor, bad fan relay, or a faulty radiator fan . Here is a more detailed list of the most common causes of a radiator fan not coming on.